Page 1 of 2
216 hp and 119 ft/lbs........sorry its not a honda.
Posted: April 14th, 2009, 2:01 am
by Nodge
You'll all have to forgive me for buying a Suxuki,
At least it's fast enough that I won't get caught riding it.
01 Suzuki GSXR 1000.
A few bolt ons,
216 hp and 119 ft/lbs on pump gas.
Here's an old pic of blowed up gixxer parts.

Posted: April 14th, 2009, 6:59 am
by ~Trever
What the fuck is bungee corded underneath it? I see whats lurking inside. Nice graph.
Posted: April 14th, 2009, 8:33 am
by AlisoBob
Your aluminum engine is "rusting"......

Posted: April 14th, 2009, 8:49 am
by hoofarted
ooohhh - boosted! Nice!!

Posted: April 14th, 2009, 9:43 am
by britincali
Posted: April 14th, 2009, 9:52 am
by Hellbear
Posted: April 27th, 2009, 5:50 pm
by Nodge
Posted: April 27th, 2009, 8:18 pm
by Nodge
Posted: April 28th, 2009, 9:01 am
by dannygraves
I don;t care who you are, thats freaken badass!
is that a t25/t28 series turbo or a t3 hybrid? I'm surprised you were able to fit it under the fairing especially externally gated.
Posted: April 28th, 2009, 11:49 am
by Nodge
Posted: April 28th, 2009, 3:01 pm
by AlisoBob
Boost gauge "only" goes to 20psi...
Quitter!
(

)
Posted: April 28th, 2009, 3:03 pm
by dannygraves
Posted: April 28th, 2009, 3:29 pm
by Nodge
It's set at 12 psi right now, on 91 octane.
Same internals are being used by the engine builder, and he made over 400 horse at 35 psi,
but had an oil pickup plug off with crappy silicone sealant,
and squeaked the mains.
His last motor was making 360 horse at around 30 psi, on C16.
Posted: April 28th, 2009, 9:34 pm
by britincali
Posted: April 28th, 2009, 10:19 pm
by Nodge
Posted: May 4th, 2009, 6:14 pm
by Nodge
Posted: May 4th, 2009, 6:55 pm
by dannygraves
Posted: May 4th, 2009, 7:15 pm
by Hellbear
Nice! I bet she's fun.

Posted: May 4th, 2009, 7:26 pm
by 100hp honda
nice machine. street bikes are fun

Posted: August 6th, 2009, 4:23 pm
by Nodge
I finally took this bike out to play a little.
I am a horrible drag racer, but it put down decent mph.
Hopefully I can take a second or more off next time out.

Posted: August 6th, 2009, 4:26 pm
by Nodge
Posted: August 6th, 2009, 4:28 pm
by Nodge
Posted: August 6th, 2009, 9:13 pm
by dannygraves
VERY

I'm lovin the wheelie action!
Posted: April 9th, 2010, 2:36 pm
by Nodge
Got some anti-wheelie parts installed!
I'm getting sick of scrubbing parts with a toothbrush, so hopefully my last few bits show up in the mail soon!

Posted: April 9th, 2010, 3:16 pm
by Rooster
Very cool!! Nice much-needed addition on the swinger
