Page 1 of 1

Question about wide ratio

Posted: March 3rd, 2009, 11:41 am
by _joshua_
To follow this post: http://www.bannedcr500riders.com/board/ ... 5086#65086
AlisoBob wrote:The stock cr250, & cr500 Ratios are:
1st: 1.8 2nd: 1.47 3rd: 1.235 4th: 1.05 5th: .909
The new Madman ratios are:

1st: 1.8 2nd: 1.47 3rd: 1.1 4th: .909 5th: .75

Madman 4th is the same as OEM 5th.

Madman 5th is clearly a overdrive.
My IMS Wide Ratio Gear Set:

Image

Image

Image

Madman ratio (in accordance to her site MadMan) and the picture above:
3eme: 20+22 = R 1.100
4eme: 22+20 = R 0.909
5eme: 24+18 = R 0.750

Mine IMS:
3eme: 21+23 = R 1,095
4eme: 23+20 = R 0,869
5eme: 25+18 = R = 0.720

The IMS is clearly longer than the madman...

Would anyone ave ratio of original HRC and BajaDesign wide ratio gear set?

Posted: March 5th, 2009, 11:46 am
by _joshua_
Installation Manual for Wide ratio:

Image

:wink:

Posted: March 5th, 2009, 12:57 pm
by Roostius_Maximus
so the woman at madman likely gave me the 250 ratios when i built that chart, I'll add the IMS one, thanks for the info, excellent to see that paperwork!

So before those are installed there should be an effort made to have them rendered with a 3d scanner and that would allow immideate reproduction in any gear vendor