Page 1 of 1
CRF 450 Tank
Posted: February 18th, 2009, 2:35 pm
by mike hunt
Hey guys i would like to put a larger tank on my af. The stock 450 tank is not big enough. A four hour harescramble and the stock tank don't mix. How much of a pain in the ass will this be. Thanks for any help Yours Truly Mike
Posted: February 18th, 2009, 4:24 pm
by Roostius_Maximus
fill the frame
Posted: February 18th, 2009, 4:37 pm
by mike hunt
Thanks
Posted: February 18th, 2009, 6:05 pm
by Balaclava
Roostius_Maximus wrote:fill the frame
Genius
Posted: February 18th, 2009, 6:26 pm
by mike hunt
Two in every crowd
Posted: February 18th, 2009, 7:32 pm
by nmdesertrider
how much fits in the frame?
Posted: February 18th, 2009, 7:55 pm
by redrocket190
Look for an oversize tank from Acerbis, IMS and/or Clarke that fits your frame Gen-wise. If you can live with shrouds that are part of the tank you can go quite big. You'll need relieve the bottom with a heat gun as necessary.
Posted: February 18th, 2009, 8:04 pm
by mike hunt
I realized you would have to heat the tank as usual. I don't see alot of home conversions running a bigger tank. Just wanted to make sure of no major issues before spending several hundred. Thanks for the info i appreciate it.
Posted: February 18th, 2009, 8:21 pm
by pstoffers
I run a 3.2 Clarke on a Gen 3 250... Gotta have it!!!