what clutches are you running
Posted: January 31st, 2009, 3:47 pm
talk to me. wha clutches are you running?
BannedCR500Riders.com
Addressing the survival of the legendary CR500!
https://www.bannedcr500riders.com/
what clutches are you running
Page 1 of 1
Posted: January 31st, 2009, 5:24 pm
Used a Hinson basket with OEM plates for several years. This summer I put the OEM basket back in (modified) with Hinson plates. Feels better now than it has for many years...although I doubt it feels any different than the next freshly broken in clutch.
Posted: January 31st, 2009, 5:27 pm
i use oem plates and never had much issue. any clutch should last for a while, provided you dont SLIP it through a 4 mile mud hole like the guy on the other site 
. if your worried about shavings in the oil then use steel plates. i thought about using steel plates and i might when my aluminums wear out but im not sure, i dump the oil every ride so i aint really concearned about the contamination. i also use heavy duty springs.
. if your worried about shavings in the oil then use steel plates. i thought about using steel plates and i might when my aluminums wear out but im not sure, i dump the oil every ride so i aint really concearned about the contamination. i also use heavy duty springs.Posted: January 31st, 2009, 7:27 pm
Barnett Carbon
Hands down.... the best.
Hands down.... the best.
Posted: January 31st, 2009, 7:29 pm
A new Barnett dirt digger is the best clutch you can buy, period.
Posted: January 31st, 2009, 10:03 pm
Ported&Polished wrote:A new Barnett dirt digger is the best clutch you can buy, period.
X2
Posted: January 31st, 2009, 10:56 pm
Barnett baby !!