Page 1 of 1
counter shaft guards
Posted: January 26th, 2009, 9:47 am
by agent
Q: do any of the newer cr/crf whatever have the same hole placement/fit as a 94 cr500 for the counter shaft cover ????
Rick
Posted: January 26th, 2009, 10:27 am
by Steiner 311
Not sure, but I usually don't run the cover on our bikes.
Jas......................................................................................
Posted: January 26th, 2009, 3:19 pm
by kkvslayer
I think if you ride in alot of mud its better to leave it off cause it acts like a catch for the mud
Posted: January 26th, 2009, 4:34 pm
by 97af
The 92-01 CR250 have the same bolt pattern.Not sure on the 02 on up but could check if you absolutley have to know. I'm really doubting any of the 4 stroke guards will work. If you dont run the plastic guard,at least use the aluminum part that mounts under the plastic guard. It will half way save your cases if you have a chain fail.The other problem not running it is if you dont put the top bolt back in, which is a case bolt, you will never be able to get it back in because it will pack up with garbage.
Posted: January 26th, 2009, 4:55 pm
by agent
gonna be for the street, I am defiantly gonna run the case saver, I just like the looks of the guard.
Rick
Posted: January 26th, 2009, 5:33 pm
by teemtrubble
Rick go get a fuking girlfriend already!
Posted: January 26th, 2009, 6:00 pm
by agent
How can you be working on my bike when you are constantly on the computer..............................dammit man
Rick
Posted: January 26th, 2009, 6:05 pm
by pstoffers
Posted: January 27th, 2009, 4:16 pm
by 100hp honda
i took the plastic gaurd off mine but i put the bolts and case saver back on, mainly so the bolt holes dont get full of dirt
