BannedCR500Riders.com

has anybody kept track of the engine that just sold on ebay for $2600.00 thats crazzzzzzy it was a very nice looking engine with some extras had a brand new stock cyl. and SFB red covers i didnt think it was going to sell at all think his starting price was $1900.00 the seller was a member of this or the other site cant remeber which, with a motar 500 ,dude got over on that one

Whats the item # ?

I'm pretty sure that engine was from the guy on the other board who had it in the street bike frame user name "lt1bird". I think that was his ebay name too. He never could get it to run right and wouldn't listen to people's advice and then I think he ended up drilling a hole through the slide on the carb and doing a bunch of other strange stuff in the jetting department. I think he had a 78 pilot in it.

I saw that e-bay ad. too after all that screwing around he sold it saying it had too much power for his application.
I'm sure it never ran right, what an idiot.



Edit:
Found the e-bay listing
http://cgi.ebay.com/ebaymotors/1997-Hon ... dZViewItem

Uzi wrote:
I'm pretty sure that engine was from the guy on the other board who had it in the street bike frame user name "lt1bird". I think that was his ebay name too. He never could get it to run right and wouldn't listen to people's advice and then I think he ended up drilling a hole through the slide on the carb and doing a bunch of other strange stuff in the jetting department. I think he had a 78 pilot in it.

I saw that e-bay ad. too after all that screwing around he sold it saying it had too much power for his application.
I'm sure it never ran right, what an idiot.

Ya thats the guy,asked the same questions over and over but never took anyones advice,his bike sounded fine in the video he posted but he insisted it had a stutter just off idle or something

WTF is with that wrist pin?

2 hours of running?
On what, recycled lawn mower oil for premix?

Non Honda gaskets?

"Needs to re rejetted".. trasnslation.... " Runs like shit"

$2600...... fool.

I would have found a few hundred more, then begged and pleaded AJ for a deal on a new crate motor!!!!

Beg? Plead?

WTF!!!!


Buy it all from HPD, and put it together yourself....

I bet its less than $2600, with our discount.

New cases, bearings, tranny, crank, jug / piston, head, covers, etc..etc..

AlisoBob wrote: Buy it all from HPD, and put it together yourself....

I bet its less than $2600, with our discount.

Someone with spare time should price that out. I would be interested to see the total.

AlisoBob wrote:Beg? Plead?

WTF!!!!


Buy it all from HPD, and put it together yourself....

I bet its less than $2600, with our discount.

New cases, bearings, tranny, crank, jug / piston, head, covers, etc..etc..

Simply put before I would dump $2600 + shipping on shiny covers, a bead blasted case/cylinder, a few spare parts and the promise of a perfect engine I would reach out for better more guaranteed resolution. I was under the impression that the 500 engine cases were no longer available, so I assumed AJ and a create motor was the best option when wanting 100% new.

S/H builds the motor, 100%, from the parts bin.

Its all available.

About $3k, for the entire engine, at list price.

I'm sure HPD would work us and added discount, beyond our 6%


Honda GEAR (25T) for 2000 Honda CR500R
13615-KA5-740

$46.87 $46.87
Honda COLLAR, DRIVE GEAR for 2000 Honda CR500R
13617-ML3-000

$24.66 $24.66
Honda CLUTCH (OUTER) for 2000 Honda CR500R
22100-ML3-910

$176.07 $176.07
Honda COLR, CLUTCH (OUTER) for 2000 Honda CR500R
22106-ML3-000

$13.57 $13.57
Honda CENTER, CLUTCH for 2000 Honda CR500R
22120-ML3-911

$49.36 $49.36
Honda DISK, CL FRICTION for 2000 Honda CR500R
22201-KZ3-730

$10.21 $81.68
Honda PLATE B, CLUTCH for 2000 Honda CR500R
22321-KA4-741

$7.75 $54.25
Honda PLATE, CLU PRESS for 2000 Honda CR500R
22351-ML3-910

$39.95 $39.95
Honda PIECE, CLUTCH LIFTER for 2000 Honda CR500R
22352-ML3-910

$17.33 $17.33
Honda SPRING, CLUTCH for 2000 Honda CR500R
22401-ML3-910

$3.74 $22.44
Honda ROD, CLUTCH LIFTER for 2000 Honda CR500R
22851-HA2-670

$11.00 $11.00
Honda NUT (18MM) for 2000 Honda CR500R
90235-KA4-000

$5.41 $5.41
Honda WASHER, PLAIN (10MM) for 2000 Honda CR500R
90401-ML3-790

$3.09 $3.09
Honda WASHER (23X45) for 2000 Honda CR500R
90457-ML3-000

$5.37 $5.37
Honda WASHER, LOCK (18MM) for 2000 Honda CR500R
90461-MAC-741

$3.85 $3.85
Honda WASHER (18X32X2) for 2000 Honda CR500R
90501-ML3-910

$2.39 $2.39
Honda WASHER (12MM) for 2000 Honda CR500R
90608-072-000

$2.15 $2.15
Honda BEARING (12MM) for 2000 Honda CR500R
91001-147-003

$6.49 $6.49
Honda BEARING (12MM) for 2000 Honda CR500R
91001-147-006

$6.49 $6.49
Honda BEARING (28X32X27.2) for 2000 Honda CR500R
91021-ML3-003

$9.19 $9.19
Honda CRANKCASE ASSY., R. for 2000 Honda CR500R
11100-MAC-305

$253.53 $253.53
Honda GASKET, CRANKCASE for 2000 Honda CR500R
11191-MAC-680

$12.58 $12.58
Honda CRANKCASE ASSY., L. for 2000 Honda CR500R
11200-MAC-305

$253.53 $253.53
Honda GROMMET, BREATHER for 2000 Honda CR500R
11206-GC4-700

$1.50 $1.50
Honda TUBE, BREATHER for 2000 Honda CR500R
11211-ML3-910

$4.20 $4.20
Honda LIFTER, CLUTCH for 2000 Honda CR500R
22810-ML3-000

$40.66 $40.66
Honda PLATE A for 2000 Honda CR500R
23521-KW3-000

$2.16 $4.32
Honda BOLT, SPECIAL (12MM) for 2000 Honda CR500R
90015-KA3-711

$3.17 $3.17
Honda BEARING (24X56X14) for 2000 Honda CR500R
91001-ML3-873

$9.19 $9.19
Honda BEARING (7X19X6) for 2000 Honda CR500R
91002-KA4-003

$10.14 $10.14
Honda BEARING, RADIAL BALL for 2000 Honda CR500R
91008-KAE-731

$22.53 $22.53
Honda BEARING, RADIAL BALL for 2000 Honda CR500R
91008-KAE-731

$22.53 $45.06
Honda BEARING, RADIAL BALL for 2000 Honda CR500R
91008-KAE-731

$22.53 $45.06
Honda BEARING (25X42X9) for 2000 Honda CR500R
91004-GC4-731

$12.89 $12.89
Honda BEARING (25X42X9) for 2000 Honda CR500R
91004-GC4-731

$12.89 $12.89
Honda PLATE for 2000 Honda CR500R
91012-KA5-690

$2.12 $4.24
Honda BEARING (33X38X8) for 2000 Honda CR500R
91022-KA4-740

$9.19 $9.19
Honda BEARING (12X16X10) for 2000 Honda CR500R
91101-PZ9-000

$4.47 $8.94
Honda BEARING (12X16X10) for 2000 Honda CR500R
91101-PZ9-000

$4.47 $4.47
Honda OIL SEAL (38X58X11) for 2000 Honda CR500R
91201-KA4-004

$9.50 $9.50
Honda OIL SEAL (12X18X3) for 2000 Honda CR500R
91201-951-003

$1.93 $1.93
Honda OIL SEAL (14X22X5) for 2000 Honda CR500R
91203-KA4-771

$2.04 $2.04
Honda OIL SEAL (14X22X5) for 2000 Honda CR500R
91203-KK3-830

$2.04 $2.04
Honda OIL SEAL (14X22X5) for 2000 Honda CR500R
91203-KK3-830

$2.04 $2.04
Honda OIL SEAL (20X32X7) for 2000 Honda CR500R
91205-166-004

$8.10 $8.10
Honda OIL SEAL (31X40X7) for 2000 Honda CR500R
91207-ML3-871

$5.49 $5.49
Honda BOLT 2, STUD (10X45) for 2000 Honda CR500R
92900-10045-3B

$0.97 $1.94
Honda BOLT 2, STUD (10X55) for 2000 Honda CR500R
92900-10055-3B

$0.97 $1.94
Honda BOLT, FLANGE (6X14) for 2000 Honda CR500R
96001-06014-00

$0.68 $1.36
Honda BOLT, FLANGE (6X75) for 2000 Honda CR500R
96001-06075-00

$1.09 $2.18
Honda BEARING (6203) for 2000 Honda CR500R
96140-62030-00

$9.64 $9.64
Honda BEARING (6203U) for 2000 Honda CR500R
96140-62030-00

$9.64 $9.64
Honda RING SET (STD) for 2000 Honda CR500R
13011-ML3-305

$33.48 $33.48
Honda RING SET (OS 0.25) for 2000 Honda CR500R
13012-ML3-305

$33.48 $33.48
Honda RING SET (OS 0.50) for 2000 Honda CR500R
13013-ML3-305

$33.48 $33.48
Honda PISTON for 2000 Honda CR500R
13101-MAC-680

$99.04 $99.04
Honda PISTON (OS 0.25) for 2000 Honda CR500R
13102-MAC-680

$99.04 $99.04
Honda CRANKSHAFT for 2000 Honda CR500R
13300-MAC-680

$303.30 $303.30
Honda KEY (25X14) for 2000 Honda CR500R
13331-360-000

$1.85 $1.85
Honda BEARING for 2000 Honda CR500R
91009-ML3-670

$9.91 $9.91
Honda MAINSHAFT for 2000 Honda CR500R
23210-ML3-000

$99.45 $99.45
Honda COUNTERSHAFT for 2000 Honda CR500R
23221-MAC-860

$78.41 $78.41
Honda COLLAR, COUNTERSHAFT for 2000 Honda CR500R
23225-MEN-730

$7.72 $7.72
Honda GEAR (28T) for 2000 Honda CR500R
23411-ML3-870

$66.37 $66.37
Honda COLLAR for 2000 Honda CR500R
23412-KA5-680

$7.87 $7.87
Honda GEAR (18T) for 2000 Honda CR500R
23421-ML3-000

$46.53 $46.53
Honda COLLAR for 2000 Honda CR500R
23422-KA5-000

$16.88 $16.88
Honda GEAR (25T) for 2000 Honda CR500R
23431-ML3-870

$51.68 $51.68
Honda COLLAR for 2000 Honda CR500R
23432-ML3-870

$8.24 $8.24
Honda GEAR for 2000 Honda CR500R
23441-MAC-680

$76.02 $76.02
Honda GEAR (23T) for 2000 Honda CR500R
23451-ML3-000

$64.68 $64.68
Honda GEAR for 2000 Honda CR500R
23461-ML3-670

$64.62 $64.62
Honda GEAR for 2000 Honda CR500R
23471-ML3-670

$39.69 $39.69
Honda GEAR for 2000 Honda CR500R
23481-ML3-670

$64.14 $64.14
Honda GEAR for 2000 Honda CR500R
23491-MAC-680

$69.69 $69.69
Honda SPROCKET (14T) for 2000 Honda CR500R
23802-ML3-871

$20.82 $20.82
Honda WASHER (25.1X36X1.5) for 2000 Honda CR500R
90445-ML3-871

$2.65 $2.65
Honda WASHER (17.2MM) for 2000 Honda CR500R
90446-KA4-740

$3.04 $3.04
Honda WASHER (27.2X35) for 2000 Honda CR500R
90446-ML3-870

$2.65 $2.65
Honda WASHER (25MM) for 2000 Honda CR500R
90463-430-000

$2.92 $2.92
Honda WASHER (8X40) for 2000 Honda CR500R
90501-KA3-741

$4.12 $4.12
Honda WASHER (19MM) for 2000 Honda CR500R
90554-KA5-680

$2.39 $2.39
Honda CIRCLIP (25MM) for 2000 Honda CR500R
90602-259-010

$3.28 $9.84
Honda O-RING (23.75MM) for 2000 Honda CR500R
91201-ML3-873

$1.92 $1.92
Honda IMPELLER, WATER PUMP for 2000 Honda CR500R
19215-KA5-690

$22.77 $22.77
Honda COVER, WATER PUMP for 2000 Honda CR500R
19221-MAC-670

$60.35 $60.35
Honda SEPARATOR for 2000 Honda CR500R
19222-KA5-690

$5.48 $5.48
Honda GASKET for 2000 Honda CR500R
19229-MAC-680

$2.75 $5.50
Honda SHAFT, WATER PUMP for 2000 Honda CR500R
19240-ML3-000

$54.20 $54.20
Honda BOLT, FLANGE (6X28) for 2000 Honda CR500R
90004-GHB-680

$1.61 $4.83
Honda BOLT, FLANGE (6X75) for 2000 Honda CR500R
90004-GHB-780

$2.90 $2.90
Honda WASHER (7MM) for 2000 Honda CR500R
90447-KE1-000

$1.32 $1.32
Honda WASHER (6.5MM) for 2000 Honda CR500R
90463-ML7-000

$1.53 $1.53
Honda BEARING (12X28X7) for 2000 Honda CR500R
91001-KA4-003

$8.82 $8.82
Honda SEAL, WATER PUMP for 2000 Honda CR500R
91211-KA3-761

$3.59 $3.59
Honda BOLT (6X10) for 2000 Honda CR500R
92301-06010-0A

$0.36 $0.36

Total: $2,995.11

I can see the reason why it didn't run right, it's got one of stupid cool heads. It was discussed long ago about how most of those are made poorly and none of them seal right. Plus if he is running a high compression dome, he is an idiot because if you look at that cylinder, it isn't even ported. It looks cool and clean, although it isn't polished, but I can see why someone bought it for big bucks.

Ported&Polished wrote:I can see the reason why it didn't run right, it's got one of stupid cool heads. It was discussed long ago about how most of those are made poorly and none of them seal right.

That's the first one I've seen and was wondering about it. Does seem like a cool idea to be able to change the dome. If you had a piston frag, just replace the dome instead of the entire head. But if there are sealing issues, I wouldn't want anything to do with it.

AlisoBob wrote:About $3k, for the entire engine, at list price.

I'm sure HPD would work us and added discount, beyond our 6%

Total: $2,995.11

Thats really good!
I looked through that list and found that there's 2 pistons and 3 sets of rings
-33.48 rings
-33.48 rings
-99.04 piston
-179.70 for a 6% discount

So the total after knocking off the extra piston and rings and figuring a straight 6% discount it would be:

$2649.41

The only advantage I see in buying one from SH is that you could get it already assembled. I know most hoons here would probably opt for some beers and night in the garage anyways.


$2650 for a new in every way 0 hour CR500 motor. Why in the world would you pay $2600 plus shipping for someone's used crap with dremel cut and drill bit special type mod job on the carb.

Not to mention that picture of the wrist pin that Bob posted and who know what else is going on with that motor. I'm sure its got more than 2hrs on it.

Not me Ilike money I'm selling my wife's jewelry so I can buy a new 450! What? I bought it anyways!

Bobber-----your list needs to be a sticky. Thanks for doing that

ebay item #110285785400

i just looked at it again HELLA FAST FOOL!!!! LOL!LOL!LOL! it looks really bad ass with all the eye candy?????????????

I told that guy he was retarded. He kept with the same stuff and even my bike stutters a little after I start it and make one lap around the yard. Stoooge

Here is one thread: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1213916020

And Again: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1214654770

Again: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1214394951

Again: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1209604399

And his first post: http://cr500riders.com/cgi/yabb/YaBB.pl?num=1210809188

Here is the video of the bike running: www.dynotunenitrous.com/store/prodimage ... unning.avi

Definately the same engine. Check out the video above. ^^^

I know when I bought my new cases, all the bearings were already installed. I got them from Service Honda.

teemtrubble wrote:Not me Ilike money I'm selling my wife's jewelry so I can buy a new 450! What? I bought it anyways!

Need bike. Have un-necessary body parts. Good condition. Best offer taken.

HAHAHAHAHA! Wait a minute... you think I could do that? The kids are right handed and the got two kidneys

Sure is pretty, love the polished kicker, but all that bling wouldn't last too long up here.

$2600............................Somebody got too much money to go along with too little brain.

Spend it if ya got it, I reckon

ya, that guy PMed me a long ass time ago and also didn't listen to my advise...