Page 1 of 1
my hillclimb vid
Posted: August 9th, 2008, 4:32 pm
by 100hp honda
to a professional they probly aint real hills but i thought they were fun none the less
1
http://www.vimeo.com/1499198
2
http://www.vimeo.com/1499076
Posted: August 9th, 2008, 4:44 pm
by britincali
Nice one man !!!!! Looks like a fun run up
You bike sounds rich as hell in vid #1 tho
Posted: August 9th, 2008, 4:47 pm
by 100hp honda
britincali wrote:Nice one man !!!!! Looks like a fun run up
You bike sounds rich as hell in vid #1 tho
the dude filming was rushing me... i just fired it up and didnt have time to clean it out. half way up the hill it cleans out
Posted: August 9th, 2008, 4:48 pm
by 100hp honda
thnx glen for the tire. it kicks ass
Posted: August 9th, 2008, 5:45 pm
by pstoffers
britincali wrote:Your bike sounds rich as hell
X10
Posted: August 9th, 2008, 5:54 pm
by Ported&Polished
Geez, I was scared for you on both vids!
That long swingarm looks like it makes the bike handle way different than stock, be carefull dood.
Posted: August 9th, 2008, 6:33 pm
by lewisclan
it looks like you mite want to shorten that swingarm alittle just so it will pull the front tire up if you pull on the bars alittle
you may want to play with it , the shorter the arm the more traction you will get
Posted: August 9th, 2008, 8:28 pm
by 100hp honda
no im leaving that swingarm like that. theres near vertical hills around here. i might not make the top but im going to try
Posted: August 9th, 2008, 8:30 pm
by lewisclan
100hp honda wrote:no im leaving that swingarm like that. theres near vertical hills around here. i might not make the top but im going to try
COOL
Posted: August 9th, 2008, 9:22 pm
by HrcRacing
Great videos of something we never get to do here in "Flat-Florida".
Posted: August 10th, 2008, 7:16 am
by 100hp honda
any local guys want to come up for a day ride ? theres some badass hills around here. extension and paddle recomended
. this is the hill from the first of the two vids i posted. ill see if i can get more hill photos today or tomorow
Posted: August 10th, 2008, 7:22 am
by lewisclan
nice
Posted: August 12th, 2008, 3:47 pm
by Slomo
Cool!
Now stand up next time- and shorten your bike.
Posted: August 12th, 2008, 4:03 pm
by 100hp honda
slomas wrote:Cool!
shorten your bike.
i cant right now. my garage/storage unit doesnt have electric outlets. i need power for a grinder to modify the chain guide to slide forward, and i need grinder to cut the chain
Posted: August 12th, 2008, 4:36 pm
by iggys-amsoil
100hp honda wrote:
....grinder to cut the chain
Posted: August 13th, 2008, 9:14 am
by quantum500
Ever tried a hammer and punch? You can bust any chain made with a big enough hammer. A grinder common man, then you just killed that link too.
Posted: August 13th, 2008, 9:25 am
by britincali
I use the grinder and air hammer method.
Posted: August 13th, 2008, 4:13 pm
by iggys-amsoil
Chain break 101;
Open vise so pins fit the gap.
Use a box or whatever to support the rest of chain.
2 lb hammer using the flat side, back end of punch to get the pin flat.
Then punch or air hammer/rivet gun with punch MADE to fit said gun.
Enjoy.
Posted: August 13th, 2008, 4:30 pm
by 100hp honda
quantum500 wrote:Ever tried a hammer and punch? You can bust any chain made with a big enough hammer. A grinder common man, then you just killed that link too.
hammer and punch aint busting RK-exw, not before next christmas anyway
. thats why i use grinder
Posted: August 31st, 2008, 9:26 pm
by quantum500
Pff give me a try! I have busted 160 roller with a hammer and punch. No thats not a typo 160 roller chain with links as long as your hand is wide.