Page 1 of 4

A short little story.....

Posted: March 28th, 2008, 11:59 am
by AlisoBob
Many of you know I own my own construction company.. it is the last thing that I think would ever happen.... but I had no choice..

See, my wife was the sales agent for an existing company specializing in composite exterior trimwork. She took that company from 1 million to 5 million in sales in 2 years. She could sell toothpaste to Britincali, given 1/2 a chance. :wink:

So anyways... she gets fired by the boss's new wife, so her worthless son can "run" the existing contracts my wife set up, pay him $80k a year, ( More than he would EVER see anywhere else) and pocket the six figure difference. Nice huh?

Baba Boom, Badda Bing.. Now were in the construction businness too.

The bank loaned me $250k against my house to start the business.( I know Iggy thinks the banks are the devil... I kiss my banks ass everyday of my life. I couldnt have done anything with out them!!)

Long story short? 80% of the customers and vendors could not have done more to help us out. We were given the same treatment and terms as the company my wife left to create a level playing field... and let the marketplace decide which business could thrive and grow. 3 years ago, their was enough business for BOTH companies to thrive.

The other company put most of thier efforts into a "smear" campagin against us, and scare their vendors that if they did businees with me, they would pull the work away from that vendor.

As it stands now, we have , by far, the majority of the work in So-Cal, and contuine to take work away from the other company. The vendors who mearly agreeded to give us a level playing field thrive off our business, and the vendors who gave into the scare tatics are going down, some allready closed.

What does this have to do with CR500Riders.com?

I was told that FMF refused to do business with Teem Trubble Motorsports due to their connection with Service Honda. All Mike was looking for was a company to supply him with pipes... NO DICE!

Pro Circuit on the other hand, is working with Mike, and giving him the same "level playing field" for him to enter the market place. No special favors, just what they would offer anybody looking to do business.

I have always been a FMF guy, I think back to the early days with Jeff Stanton flying high in their magazine ad's. P/C always seemed like the "corporate" sponsor, and FMF like the local bike shop. Dont know why, its just the way I have allways felt.

Now?

I will never buy another FMF product. Ever.

Not a threat, just a fact. Feel free to join me.

If they cannot suppport what American is founded on.... FREE ENTERPIZE, fuck um!

If S/H and FMF are afraid that tiny little Teem Trubble Motorsports represesnts such a threat, perhaps they need to re-examine their own business models.

I say a big THANK YOU to Pro Circuit for supporting Mike in his start up business.


Image


Pro Circuit Rules!!!

Posted: March 28th, 2008, 12:08 pm
by dannygraves
Ya, I'm pissed at FMF anyway, I e-mailed then about their discontinued "fatty" pipe and even told them that people were going to PC for a higher reving pipe since they no longer offer the fatty. I did not even get a response! :evil:
I have to admit, I do not like the way they are conducting business.

Posted: March 28th, 2008, 12:14 pm
by Exnav
I'm with you brother!

Posted: March 28th, 2008, 1:42 pm
by Hellbear
Kick ass Bob I am glad your business is kicking ass.

That sucks that FMF is doing that to TT. They won't be seeing any of my business. Atleast both my bikes already have PC pipes on them.

Posted: March 28th, 2008, 1:45 pm
by britincali
Ive never been a fan of FMF anyway and if I had the choice of either for free it would be PC all the way.


Oh and bob your wifes toothpaste would have to be cheaper than anyone elses :wink:

Posted: March 28th, 2008, 5:16 pm
by mxracr121
If I were Service Honda, I WOULD be afraid of Teemtrubble. He builds a better product, plain and simple.

Posted: March 28th, 2008, 5:22 pm
by ou812
Hmmmmmmmmm.... seams maybe a year or 2 ago I posted a semi rant about FMF, how they as a company sucked regardless of the product they sold. Well the vast majority seemed to think I was out of line.

Well maybe, just maybe I was not so out of line.
FMF is a joke, said it before now I'll say it again FMF is a joke.

OK here is one more for the recored Pro-Flo is a joke... Beware!

Posted: March 28th, 2008, 6:20 pm
by AlisoBob
mxracr121 wrote:Teemtrubble builds a better product, plain and simple.
:woot: :woot: :woot:

:headbang:

Posted: March 28th, 2008, 6:32 pm
by Blusmbl
Bitchin' that's fantastic they're willing to work with Mike. I'm even happier with the platinum/silencer combo on my CR. Now if we could only get them to make an equivalent to the FMF Gnarly!

Re: A short little story.....

Posted: March 28th, 2008, 6:32 pm
by iggys-amsoil
AlisoBob wrote: The bank loaned me $250k against my house to start the business.( I know Iggy thinks the banks are the devil... I kiss my banks ass everyday of my life. I couldnt have done anything with out them!!)
Gota do what ya gota do man.

I feel the love. :lol:

I thought SH were using PC pipes.

Posted: March 28th, 2008, 6:36 pm
by AlisoBob
Blusmbl wrote: Now if we could only get them to make an equivalent to the FMF Gnarly!
I not saying anything on that one!

:eatdrink:

Posted: March 28th, 2008, 6:50 pm
by jbird_710
I've been using PC pipes since the '80s and have been compltely satisfied. Just replaced the FMF on my 500 AF with one and feel even better about it now. :nanna:

Posted: March 28th, 2008, 7:34 pm
by lewisclan
Right on Ill buy my next pipe from Mike

Posted: March 29th, 2008, 11:27 am
by AlisoBob
Remember when they used to burn big piles of Elvis Presley records, cuz they were "The Work of the Devil!!"??

Stay tuned......

:lmao: :lmao: :lmao:

Posted: March 31st, 2008, 8:19 am
by teemtrubble
Thanks guy's for the support...

I even offered to buy the minimun order which is 25 pipes pay for tooling and set up and they said they'd have to call me back...WTF! is that shit?

I have a hard time saying no to people who want to throw money at me I just say "It's 10 weeks out!" hahaha...

Stay tuned for more...

Posted: March 31st, 2008, 8:49 am
by AlisoBob
Mike, any chance you could talk to P/C about building this style pipe for the 500?

http://www.procircuit.com/store/pc/view ... oduct=1196


Platinum 2 Pipe Specs....

Design and construction, strength and performance - these are the key elemenets of the Platinum 2 Pipe. It's increased low-end and mid-range horsepower enable it to take you to a new level.The Platinum 2 pipe was made for people who ride or race off-road. Constructed from heavy-duty 18- gauge metal, it offers increased protection from rock or crash damage.

Posted: March 31st, 2008, 9:44 am
by teemtrubble
Talked to Dan at Pro Circuit already stay posted fella's...

I've always been a PC guy but, just dealing with Dan and PC they're a bitchen company to work with! I feel it's a superior product by far!

Everyone here should chime in let PC know how you feel we may all get what were looking for and make this a win win situation for all of us.

Posted: March 31st, 2008, 9:50 am
by dannygraves
I'd like to see more pipe selection as well. everyone makes a lowend or mid pipe for the 500... it would be cool if there were more options. Although with the platinum and possibly the platinum 2, that would be great, a lowend pipe and a mid pipe... I guess the topend pipes will still have to be custom though...

Posted: March 31st, 2008, 12:52 pm
by AlisoBob
It might be cool if they offered a pipe with the rear mount included, but loose.

There are so many homebuilds going on, it would be a no brainer...

Order the pipe
Mark where the rear mount will go.
Weld it ( or take it to someone)

Done!

Posted: March 31st, 2008, 2:06 pm
by dannygraves
that messes up the plating there though Bob... I think they should make an A/F pipe that just doesn't have any rear mount on it and has a type of hose clamp with a mount attached so you could easily relicate the mount to anywhere on the stinger section.

Posted: March 31st, 2008, 2:10 pm
by Exnav
I think they should pack their pipes in bubble wrap before they place in the plastic bag. My coating got dinged up in transit.

Posted: March 31st, 2008, 2:11 pm
by AlisoBob
dannygraves wrote:that messes up the plating there though Bob...
I was thinking the "Works" pipe ...

Posted: March 31st, 2008, 2:17 pm
by dannygraves
that would be cool for the works pipe! :D

Posted: March 31st, 2008, 2:39 pm
by teemtrubble
That's the one's I run! teem trubble "Works" CR500 mang!

Posted: March 31st, 2008, 3:10 pm
by teemtrubble
Oh I forgot one thing FMF did say if I wanted one of their pipes to call Service Honda! :screwy: