Page 1 of 1
2001 Cr125
Posted: March 20th, 2008, 10:17 am
by smokindodge
I found a heck of a deal on a 2001 CR125. What generation would this be considered? How much more work am I looking at over a gen1 250, or can it even be done in this frame? Any input would be great. Thanks guys.
Posted: March 20th, 2008, 11:08 am
by ShanMan
that would be a gen. two...but I would caution you from going that way....it involves far too much fabrication in my opinion. better to find a good 250, regardless the generation. Just my .019999 worth.
a gen. two will handle better than a gen. one, but the gen. one is a slam-dunk easy conversion...much less fabrication/modification to the frame than a gen. two.
Posted: March 20th, 2008, 10:21 pm
by 87CR500Rider
This is the same chassis I'm gonna use. Just got the bike and am looking forward to the conversion.
Posted: March 20th, 2008, 10:54 pm
by iggys-amsoil
Shanmans right of course, however if I were to do that I would plan on redoing the whole cratel from the Y back to the foot pegs.