Page 1 of 1

Amsoil and your starter motor

Posted: January 14th, 2008, 1:51 am
by iggys-amsoil
Changed the oil in the trans and motor yesterday in the new to me Accord, an 88 with 155K. Idiots, put gear oil in the trans. :x should be 10W-40 or 20W-40 per the Accord manual.

Anyway I have always noticed other Accords starting like the battery is going bad. This one was no exception. Well this morning with 5W-30 in the motor I swear its like one revolution and shes run-in. :cool:

Side note; the old one with over 500K still had the original starter in it. :shock: :cool:

Posted: January 14th, 2008, 7:48 am
by 100hp honda
ya some people figure its a "transmission" so it must need 90wt or something like back in the old days. my truck calls for 90wt in the tanny, trans case and axles-my car if i remeber was 30wt motor oil for the transmission. alot of vehicles ive see nowdays use dexron3 in manual transmissions

Posted: January 14th, 2008, 9:20 am
by dannygraves
my uncles old 5.0 mustang was mine for a while, and I converted it to a 5 speed after blowing out the o/d band for the 3rd time. the t-5 trans I got had gear oil in it (calls for ATF) and grind going into second. I can only assume its becasue the wrong oil was used. other than the grinding, it worked a lot better with the atf in there.

Posted: January 14th, 2008, 9:54 am
by britincali
I had a T-5 in tox's mustang and its a junk tranny, the tolerences from the factory are all over the place. If you strip it down and shim everything up its a decent tranny but in stock form its notchy as hell.

Posted: January 14th, 2008, 12:24 pm
by dannygraves
yeah, not very smooth. I'm trying to get hoofarted to trade me that car for some a/c equipment. if he goes for it, then the car will need a tremec :D
as of right now it sits there all sad and dirty :cry: :cry:

Posted: January 14th, 2008, 12:26 pm
by 100hp honda
speaking of grinding and idiots without a clue: 1989 f-250 i had years ago had the ZF 5 speeed- apparently its supposed to use ATF, the dipshit i got the truck from put some kind of gear oil in it...it didnt totaly fock up the tranny but it focked up 2nd gear to 3rd it would always grind. im assuming all those new trannys have very small bearings and gears and such which require thin lubricant like ATF.