Light and 45w coil
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
I got a tail light sorted today, $14 from walmart its an LED head lamp thing that has two red LEDs in it. Its supposed to run 4 LEDS for 50hrs so 2 should be good for at least 75.
I afro engineered it to the rear fender
I afro engineered it to the rear fender
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
looks like that will work, it also matchs the bike
Last edited by lewisclan on January 12th, 2008, 7:59 am, edited 1 time in total.
"the game of life of is not so much in holding a good hand as playing a poor hand well"
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
lewisclan wrote:I dont run rear lights on any dirt bike
Apparently its a legal requirement at dumont, glamis and pismo. I don't want to give them any excuse to hassle me.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
Its a "Moose" coil made by the same company as yours. The reason it looks different is because it was mispackaged. Its a stock replacement for the standard ignition stator. It was "supposed" to be the same one you have thats a LIGHTING coil. They are shipping the correct one today. Im supposed to have it tomorrow or Thursday at the latest. Since most of the work is done all I should have to do now is swap the coils...britincali wrote:What type of coil is that is look different than mine, it looks smaller too.
Mine looks almost identical to the stock coil but without the insulation.
I already have a lighted flag so im good to go...
Faster then Speedy Gonzalez, slower then the Road Runner!!! MEEP MEEP
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
Lighted flags arnt "required" but.........britincali wrote:You need a lighted flag too????
You got any glowsticks?
I usually have a few in the RV for the dogs but im not sure. Walmart has many colors and they are CHEAP. Look in the camping section.
Faster then Speedy Gonzalez, slower then the Road Runner!!! MEEP MEEP
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
I have never had one on the truck and no one has sad anything. Its funny, you have to have a FLAG but it doesnt have to be lighted. Another fuggin retarded "Republic of Commiefornia" law...britincali wrote:If it aint require then I aint doin it
Faster then Speedy Gonzalez, slower then the Road Runner!!! MEEP MEEP
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
2002 CR80
1999 Cr500
2003 CR250R
2005 CRF250R
2006 YZ450F
2005 CBR1000RR
1997 Banshee
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
I installed a 12v regulator to fix the ultra bright blowing bulb issue, the part number form www.electrosportusa.com is RG12
It had to be bolted to the frame as a heat sink, I bolted mine to the upper tripple clamp. Heres a diagram of how I wired it..
And a tech writeup
http://www.electrosport.com/electrospor ... hting.html
It had to be bolted to the frame as a heat sink, I bolted mine to the upper tripple clamp. Heres a diagram of how I wired it..
And a tech writeup
http://www.electrosport.com/electrospor ... hting.html
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
I found this on ebay out of GB. Has anyone tried one? I asked the seller what the output was and a couple other questions and they havent gotten back yet. It should be some good output for that price though....maybe someone over there can give them a call and ask.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 55569&rd=1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 55569&rd=1