Page 8 of 10
Posted: April 30th, 2010, 5:16 pm
by dannygraves
I'm liking the middle pic
Posted: April 30th, 2010, 5:56 pm
by sabreguy
dannygraves wrote:I'm liking the middle pic
X491!!!!
1984 CR500R
Posted: June 11th, 2010, 3:50 am
by thall
Got a new Seat Cover
Posted: August 3rd, 2010, 5:54 am
by dubious01
AlisoBob wrote:
Glenn @ GSS sent me this....
"Bob, This is my personal play bike I bought it new in !997 I have a short inseam (only 26" ) so I completly modified this bike in the first few months I had it . The first thing I did was modify the rear shock and lowered the forks by building my own set of pull backs. So now I can set on the seat with both feet on the ground ,And I still have 11.2" of travel in the rear and the same stock travel in the front. One advantage of this is I didn't lose any travel and the geomerty is still close to stock, only It will turn a lot quicker now. At the time I built the bike I used it as a test bed for my porting and redesigning of my designs on the CR-500 engine. It still get's little changes once in a while It flows at 6" Water 94% across the transfer ports and they are perfectly matched. I raised the exhaust ports and redesigned the exhaust runner. I added a few more intake ports. The engine now has 12 ports total . In doing this I was trying to make more H.P.everywhere bottom,mid,and quite abit more on top end .But it being my on personal play and trail bike I wanted to still be able to use pump gas.Anyway to sum it up with a pipe I made here in the shop it makes about 38 H.P at around 4,000 RPM And 61 H.P at 6,300 RPM and at 8,400 RPM it makes a honest 83 H.P. So you can see it's fun to ride And I haven't had it down now for about a year but in 5 kicks it still holds 190 PSI. I'm having poor health again, but I like have something to write about or brag about ,and still loaf around the shop.Your friend Glen (TEAM GSS) NAHA #42"
Thanks for the story and pic's Glenn....
Hope your feeling better soon!!!
wow those numbers are surreal...
Posted: August 5th, 2010, 12:23 pm
by glen howell
123]
Posted: August 5th, 2010, 12:32 pm
by glen howell
123
Posted: August 5th, 2010, 12:44 pm
by glen howell
123
Posted: August 6th, 2010, 11:30 pm
by dubious01
Glen, I didn't realise it was crank dyno.
Very cool bikes!
I think its also very cool that you still ride, and can only hope I still will when I am your age!
I hope your health is well,
You have my Kudo's and admiration, on many levels
Posted: September 9th, 2010, 1:57 pm
by glen howell
123
Posted: November 9th, 2010, 7:26 pm
by lerea3
Here is mine before and after.
Posted: January 9th, 2011, 4:29 pm
by M.F.D.B.
Ya ya, its a 250, but im trying... =)
Just put new plastics, graffics and exhaust. Havnt changed anything "bling" wise since I bought it and wanted a new look. =) So I hooked a hoon up with the "old" stuff and started over.
Before:
Now:
Posted: January 10th, 2011, 7:48 am
by hoofarted
Clean Gen3 minus the hose clamp on the exhaust...a little busy for my style - but clean. I still think it needs the 500 motor in it to be proper.
Posted: January 10th, 2011, 8:35 am
by AlisoBob
Am I the only one who thinks that the sexy, curvey kicker on the CR500 is a piece of art?
I really dislike the CR250 crowbar.
I know some go the other way round.... but I'd put the 500 kicker on the 250.
Posted: January 10th, 2011, 9:58 am
by M.F.D.B.
Im not sure if that would work Wook, maybe one of these days ill try swapping them.
The hose clamps are to seal the rubber boot. I used to use safety wire since I also hate the look of hose clamps but all the safety wire ive bought is junk and it takes 7-10 tries per loop to get one that holds and doesnt snap while im tightening it...
Posted: January 10th, 2011, 5:56 pm
by iggys-amsoil
Only in Vegas!
So your suppose to confuse me with so many spots like a Zebra with blinding speed?............. Not a chance.
Posted: April 2nd, 2011, 3:03 pm
by Widow Maker
Posted: April 28th, 2011, 1:27 am
by Waz
Only the 500 is mine, but it lives with the rest of my fathers junk at his place
So we have,
01 cr500
xl500
xl 175 and 350 k0
xr75 k0 x 2
cbx1000 x 2
Afew kz's included acouple z1's hiding
and his 65 impala ss
Posted: May 30th, 2011, 8:35 pm
by 63MARKS63
Posted: June 2nd, 2011, 10:49 am
by DieHard2Smoke
heres my 85 at st anthony
Posted: June 2nd, 2011, 12:39 pm
by Kuma
Would much rather be there now than here
Posted: December 8th, 2011, 7:20 pm
by cr500man
Here is my hillclimb bike with the new oversized heart.
Posted: December 8th, 2011, 8:41 pm
by Roostius_Maximus
very sweet
Posted: January 27th, 2012, 7:26 pm
by asteroid500
Posted: January 27th, 2012, 8:08 pm
by ZETTNORCAL
wow, that g-2 is really nice. What is the black thingy on the top of the rear caliper?
Posted: January 27th, 2012, 10:19 pm
by asteroid500
Not sure ... ask PStoffers