Page 1 of 1

internal parts and other parts (pics)

Posted: December 20th, 2007, 11:22 am
by 100hp honda
all these came out of my '00 bike when i did the '89-'92 , 4th and 5th gear swap. i was going to keep everything for extras but i see no need to. perfect for anyone wanting to swap their '89- '92 to the wider ratio 4th and 5th, its all a direct fit just plug and play. pictures and measuremnets on any parts, just ask. this is what i have as of right now until i check the shed for more stuff. (PENDING SALE ON ALL TRANNY PARTS EXCEPT FORKS AND SHAFTS)


1- complete set of washers and circlips
2- 4th and 5th gear set
3- collars for 4th and 5th gears
4- all 3 shift forks
5- both shift fork shafts
6- shift star
7- shift star arm and spring
8- good '98 seat, the red stripe is a little dirty from normal use. ill see how well it cleans up


Image

Image


if you know your cr5 tranny specs, youll know what these numbers meen. if not, im not going to explain it

Image
Image
Image

Re: internal parts and other parts

Posted: December 20th, 2007, 11:30 am
by hoofarted
100hp honda wrote:all these came out of my '00 bike when i did the '89-'92 , 4th and 5th gear swap. i was going to keep everything for extras but i see no need to. perfect for anyone wanting to swap their '89- '92 to the wider ratio 4th and 5th, its all a direct fit just plug and play. pictures and measuremnets on any parts, just ask. this is what i have as of right now until i check the shed for more stuff


1- ill double check but i believe i have complete set of washers and circlips
2- 4th and 5th gear set
3- collars for 4th and 5th gears
4- all 3 shift forks
5- both shift fork shafts
6- shift star
7- shift star arm and spring
8- good '98 seat, the red stripe is a little dirty from normal use. ill see how well it cleans up
9- i have a complete stock rim and hub front and rear wheels i may get rid of if someone needs that
I am interested in the wide ratio 4th and 5th. Is that complete with everything needed? How much would you like for it? TIA.

Posted: December 20th, 2007, 11:53 am
by 100hp honda
to do the swap all you need is the gear set (4 gears). all the spacers and collars are the same, shift forks are also the same. what parts do you need? just gears? remeber these gears just get you to the '93- '01 ratio, not an actual wide ratio like the madmanengineering WIDE ratio or whatever it is

Posted: December 20th, 2007, 11:57 am
by hoofarted
100hp honda wrote:to do the swap all you need is the gear set (4 gears). all the spacers and collars are the same, shift forks are also the same. what parts do you need? just gears? remeber these gears just get you to the '93- '01 ratio, not an actual wide ratio like the madmanengineering WIDE ratio or whatever it is
Yeah, just the gears then, I guess. I currently have a 92. And that is the close ratio trans. I am after the later model ratios (93+).

Posted: December 20th, 2007, 1:12 pm
by 100hp honda
ill send a pm for the whole enchilada.

Posted: December 20th, 2007, 1:30 pm
by 100hp honda
i have a good right side radiator too if someone needs one

Posted: December 20th, 2007, 3:19 pm
by teemtrubble
What year is the radiator? and how much?

Posted: December 21st, 2007, 2:53 am
by zorak-2
If hoofarted passes on the gears then I want them.

Posted: December 21st, 2007, 9:23 am
by 100hp honda
pm sent