Page 1 of 1
cr500 rod
Posted: March 31st, 2017, 12:44 pm
by mocr13
was looking around for a part number for 2001 stock Honda rod and cant seem to find the rod or rod bearing anywhere just whole crank (discontinued) so thought I would try the knowled
gable people here and see if they know?
Posted: April 1st, 2017, 10:10 am
by hurky
Hi mocr13, having a look at the OEM part list it seems that the crankshaft was only sold as a unit, no individual parts like the rod or bearing.
You have good rod's from ProX and Wössner
Regards.
Posted: April 3rd, 2017, 1:39 pm
by Roostius_Maximus
it was offered individually in the 90's, you will need a pro-x part now
Posted: April 3rd, 2017, 2:01 pm
by mocr13
Is pro x as good as honda oem part ? Or should i see if can reuse stock rod? And what about rod botto. Bearing?
Posted: April 3rd, 2017, 2:02 pm
by mocr13
Is pro x as good as honda oem part ? Or should i see if can reuse stock rod? And what about rod botto. Bearing?
Posted: April 5th, 2017, 8:30 am
by Roostius_Maximus
i mentioned prox if you needed the big end bearing on its own.
if you need a rod kit buy a Wossner, or a PRO-X kit