BannedCR500Riders.com

MSV Racing CR500 exhaust manifolds are now for sale!

They fit 1985-2001 and are made of aerospace-grade billet 7075 T6-511 aluminum, which is twice as strong as the normal 6061 that most aluminum parts are made from. They are available in natural unpolished aluminum color or matte black Cerakote 2000*f ceramic coating, and come with the 4 high-temp O-rings installed. If replacement O-rings are ever needed, they will always be available through MSV Racing.

You can purchase these manifolds through PayPal using your bank account or credit card. Cost is $89.00 plus shipping. Buy 2 manifolds at regular price and get $5 off each additional manifold. This first batch of 49 will be sold on a first-come-first-serve basis. I will produce more when this run is getting low, so if you miss out, don't worry.
To purchase: EMAIL me at carracinjay@gmail.com with your first and last name, shipping address, number of manifolds being purchased and colors. I will email you back with total. Once funds are in my PayPal account they will be shipped promptly.

I'm a bit surprised as well.
These are obviously well made.
I have no need of any at this time but you can bet that when I do I will be ordering one.

Thanks Sandblaster,

I suspect after Adam tests his MSV Racing manifold and posts his results things might start to open up for MSV Racing on this forum.

I should have a new CR5 product to post in a week or so.

Getting a thumbs up from Adam will go a long ways to kick start sales

Msv Racing Jason Meyer

A handful of benefits are-

3 high temp O-rings on the manifold spigot that seal the expansion chamber stopping the black drool that can leak on the OEM flange.This also allows easy pipe removal and install without having to re-seal.

There is the 4th O-ring on the back of the flange that eliminates the gasket, stopping the need to buy a gasket or scrape one off when doing top end etc.

The ceramic coated one in theory will promote exhaust flow by keeping the exhaust temp up by not allowing the exhaust temp to dissipate through the Al flange.

Both versions have a lead in taper in the exhaust hole on the flange side allowing for larger exhaust port matching which could promote more power.

They look awesome.

MSV Racing manifold is less then half the weight of the OEM.

I want to thank Adam MillAr of MRE - Millar Race Engineering for the super close up of the MSV Racing exhaust manifold MRE will be testing.

Adam had this to say so far-

"I received my new aluminum exhaust flange for the CR500 which is made by MSV Racing Jason Meyer. The finish is like jewelry, the fitment is exact and he's taken care to consider Venturi effect with proven profile angles inside the flange. The thick sealing collar that trains an O-ring to the cylinder also has a divot for the lower exhaust spring hanger to proper locate in. Nothing has been overlooked, I obviously haven't been able to run it yet but I expect it to work well and scheduled for some MRE tearing when the weather changes."

Wow, anyone even on this forum anymore. After selling 37 manifolds with extremely happy customers so far, I find it hard to believe everyone on here is happy with there OEM exhaust manifold...

Another happy customer-

"Thanks MSV Racing Jason Meyer fastest service in the USA. Sick part can't wait to torque it down!" Dan Huckins

The road it took to get to the perfect 1985-2001 CR5 exhaust manifold.



Manual machining the first aluminum prototype for testing.

Gotta love customer support! Thanks Scott Boston!

Got my box yesterday from Jason!!!

Thought he forgot to put something inside it ?????? It was so light?????

That's was the first thing I noticed!!!!!

Once I got inside it, by the way it was packed really well ,I started looking it over!!
I got the ceramic 1 , the finish was perfect 100% coverage with no runs!!!

Machining was flawless!!

Thought it was ti. At first??

It will be a while before I get to put it on as its for my big bore stroker motor I'm building , I'm sure it's going to work great

Can't wait for feed back from Adam
Would definitely recommend it to others and will get another if needed

Thanks Jason for the hard work Keep it up we need more stuff like this for these bikes

The thaw is on!
Hopefully get some tire roasting road rides in shortly.

Thanks for the great pre-test review!

Anxious to hear more ride test reviews!

I will have a new prototype product for fitment testing (3D) printed to throw out to you guys for visual evaluation hopefully tonight or tomorrow. This is geared a little more toward the Outlaw kart guys, but will work equally well on the bikes.

Who is going to CAGE CUP? Outlaw Cage Kart racing Oregon State Fairgrounds in Salem March 18th-20th. This is a televised event!

Can't wait to see the 500+cc Outlaw Karts tear up the track! I have racers running my manifolds and supporting MSV Racing with big stickers on their karts and trailers.

https://www.facebook.com/Kagecup/?fref=ts

Here are 2 3D printed first prototype parts from MSV Racing geared toward the CR5 engine. Outlaw Karts, Desert racers, Supermoto/street, Hillclimb, anyone who wont see heavy mud. These will be billet Al and thermal dispersant coated to help stave off heat soak. BIG DEAL in Outlaw Karting.

Oooowwwwww! Daddy likie!!!!!!

I know many wanted to see a mounted pic. Elbow fits Kart perfect, but touchs rads on bike so it needs slight sizing change. Tis the world of R&D, thank goodness for 3D prints lol!

Not CR500 bike related, but CR500 engine related!

Let the racing begin!

MSV Racing and Bennett Motor Sports are heading out to Cage Cup this weekend to start the 2016 race season! Go Adam Bennett!

Great racing today in qualifing and heat racing for my guys. MSV Racing Exhaust Manifold is taking the beating! Adam Bennett is still struggling with engine gremlins. Johnny Burke is running great and ready take the win! Johnny will start outside front row in the big show. These karts are fast! 100+mph

Johnny Burke- JWB Racing



Adam Bennett- Bennett Motor Sports

Scott Boston-

"I spent a couple hours testing today and i am a giggling mess and have 3 people to thank,i made a small jetting change when i installed my freshly cut head from (adam millar),at the same time i instled a 1985 cr500 water pump gear (the only year thats metal)and had it cryoheated and michropolished,the head is awesome,the bike pulls with authority and keeps pulling the the end of the rpm band (exactly what i asked for)it pulls so hard that the cr500 demon inside me giggles like an evil skoolgirl (WOW).and the CryoHeat is so damn good that while thrust back trying to hold on i am upshifting without the clutch while on the power and it is shifting better then it did using the clutch without the treatment.and every time i look at my msv exhaust flange it is dry as a bone.i would defiantly say that if you are building a conversion and want some of the best that this field has to offer than 3 clear choices on your list should be (msv racing)(mre,millar racing engines)(cryoheat).‪#‎CryoHeat‬ ‪#‎skidplateracing‬ ‪#‎joshlahay‬ ‪#‎msvracing‬ ‪#‎millarracingenginesn‬ ‪#‎haulinass‬

So your trans is has been done with the cryoheat also?

likelite wrote:So your trans is has been done with the cryoheat also?

This is a quote from one of my customers.

I am very proud of both my racers efforts at Cage Cup 2016!

Johnny Burke went on to take second place at Cage Cup which is a huge accomplishment especially with no brakes!! Very proud of his and his crew chief's efforts, and being a humble racer!

Adam Bennett was plagued with mechanical issues that were not the norm for this racing family. Adam took these issues like a
professional and showed great sportsmanship! He will be back strong in the next round of racing.

I am proud of both of these young guys. They make it easy for MSV Racing to help support their efforts. Watch for more racing and new upcoming MSV Racing parts to be featured on their Karts.

Great job guys!

These 500+cc CR5 engines are ran far harder over a far longer period of time (30 nearly full blast laps) then any other sport except maybe top desert racing. No leaks from either of my racers MSV Racing exhaust manifolds.

MSV Racing is back in the 7075 T6-511 Aluminuim manifold business. I have 14 natural Al versions available right now. In a week-ish time I will have 15 matte black Cerakote and 15 vintage gold Cerakote ceramic coated manifolds. If you haven't already, let me know what you need.

Awesome product!

I installed it and now have no leaks!

Thanks for making these products!