Page 1 of 1
VFORCE2 off a 97 cr500
Posted: September 9th, 2014, 8:13 am
by 97cr500climber
got a good VFORCE2 reed cage I removed to go with a V3 make offer
Posted: September 14th, 2014, 5:53 pm
by mocr13
pm sent
Posted: September 14th, 2014, 7:06 pm
by Roostius_Maximus
Bin that vf3, quick!
Posted: September 15th, 2014, 12:18 pm
by 97cr500climber
do you not like the VF3 ? why not ?
Posted: September 15th, 2014, 12:39 pm
by Roostius_Maximus
shallow pedal angle, its crap
Posted: September 16th, 2014, 8:05 am
by 97cr500climber
huh it actually flows more than the 2 due to more tip area
Posted: September 16th, 2014, 8:42 am
by Roostius_Maximus
I've run and flowed everything out there. The VF3 is by far the worst setup ever.
here are some pictures showing flows, I check them with a boot and carb too and the vf2 is still the best.
https://onedrive.live.com/?cid=BD4AA268 ... E9%2140075
Posted: September 16th, 2014, 8:48 am
by Roostius_Maximus
they don't seal at low rpm, at high rpm the inner pedals contact eachother. They're turbulent, they're body is too long, pedals too thin and pedal angle is too long.
Posted: September 23rd, 2014, 8:17 am
by 97cr500climber
sold
Posted: September 27th, 2014, 8:11 am
by NikOtiN
vf2 better than vf3 for cr500 only? What about cr250 valve reed? You tested them?