VFORCE2 off a 97 cr500

97cr500climber · Post by **97cr500climber** » September 9th, 2014, 8:13 am

got a good VFORCE2 reed cage I removed to go with a V3 make offer

mocr13 · Post by **mocr13** » September 14th, 2014, 5:53 pm

pm sent

http://www.youtube.com/user/500bigbore · September 14th, 2014, 7:06 pm

Bin that vf3, quick!

97cr500climber · September 15th, 2014, 12:18 pm

do you not like the VF3 ? why not ?

http://www.youtube.com/user/500bigbore · September 15th, 2014, 12:39 pm

shallow pedal angle, its crap

97cr500climber · Post by **97cr500climber** » September 16th, 2014, 8:05 am

huh it actually flows more than the 2 due to more tip area

http://www.youtube.com/user/500bigbore · September 16th, 2014, 8:42 am

I've run and flowed everything out there. The VF3 is by far the worst setup ever.

here are some pictures showing flows, I check them with a boot and carb too and the vf2 is still the best.
https://onedrive.live.com/?cid=BD4AA268 ... E9%2140075

http://www.youtube.com/user/500bigbore · September 16th, 2014, 8:48 am

they don't seal at low rpm, at high rpm the inner pedals contact eachother. They're turbulent, they're body is too long, pedals too thin and pedal angle is too long.

97cr500climber · Post by **97cr500climber** » September 23rd, 2014, 8:17 am

NikOtiN · Post by **NikOtiN** » September 27th, 2014, 8:11 am

Roostius_Maximus wrote:I've run and flowed everything out there. The VF3 is by far the worst setup ever.

here are some pictures showing flows, I check them with a boot and carb too and the vf2 is still the best.
https://onedrive.live.com/?cid=BD4AA268 ... E9%2140075

vf2 better than vf3 for cr500 only? What about cr250 valve reed? You tested them?

BannedCR500Riders.com

VFORCE2 off a 97 cr500

VFORCE2 off a 97 cr500