Page 1 of 1
What radiator hoses?
Posted: July 10th, 2014, 10:32 pm
by CAD
I'm almost finished my 05 Gen 3 CR250 with the 91 CR500 engine build and I don't have any radiator hoses. (building from scratch) Does everyone just buy two sets of hoses (CR250 +CR500) and then take what they need? What's the consensus?
Cheers
Posted: July 11th, 2014, 8:01 am
by Roostius_Maximus
The 500 upper hoses work, the lower cross over is its own depending on how you've done the outlets. and then obviously cr5 hoses at the waterpump. i usually get the black chinese rad hose set for the cr5 and then do my own lower cross over.
Posted: July 25th, 2014, 3:24 pm
by Bronson
I did the same as Adam (per his recommendation actually). I got a silicone hose kit from eBay that I used for the upper hoses and the water pump to cylinder. I then used a straight piece of hose cut to length for the crossover and for the water pump to radiator I needed a hose with a 20* curve on one end. My local auto parts store had something that worked perfect.