Page 1 of 1
Removing Flywheel
Posted: July 21st, 2013, 1:24 pm
by JakeBoucher
The Flywheel on my 85 CR500 has a little corrosion I would like to clean up. Pulled the nut off and obviously it didn't come off with a little tug. Anyway, where do I get a puller or what I need to get it off? Can I just buy a bolt with the correct threads, or would that be hard to find?
Posted: July 21st, 2013, 2:05 pm
by Nodge
You need a flywheel puller.
If you try anything else, you will be sorry.
Posted: July 21st, 2013, 3:37 pm
by JakeBoucher
Where do I get the Flywheel puller? I looked on a couple sites and they don't carry one for the older models.
Posted: July 21st, 2013, 4:01 pm
by Nodge
I ordered a whole kit full of pullers on eBay.
All you need is the 27mm puller for CR's.
Like so:
http://item.mobileweb.ebay.ca/viewitem? ... 0567958788
http://www.bikebandit.com/motion-pro-ma ... -left-hand
Any motorcycle shop can order you one.
Posted: July 21st, 2013, 5:04 pm
by JakeBoucher
Ok, thanks alot.