Page 1 of 1
CR250 IGNITION SWAP
Posted: June 24th, 2013, 2:45 pm
by JEFFBUM83
I have a 93 cr500 that i eventually plan to stick in the 2002 chassis in my garage....in the mean time, my cdi took a crap and i would like to use the 250 ignition if I can. I've read thru the sticky about swapping over and doing the stator mod, but unless I'm reading it wrong, that's a 99 model cr250. Can the newer ignition that I have be modified in the same way?
Posted: June 24th, 2013, 3:16 pm
by fmikhele
Gen 2 (2000-2001) CR250 ignitions make for the cleanest swap with the least amount of modifications needed to the existing wiring harness.
Posted: June 26th, 2013, 12:55 pm
by JEFFBUM83
trying to use a the 02 because that's what i have lying around. has anyone on here used an 02 and up? if so how does it differ from the older mod?
Posted: June 26th, 2013, 3:25 pm
by Roostius_Maximus
slot the stator plate, align it for the trigger, run it.
Posted: July 4th, 2013, 12:50 pm
by craigf40
Yes it works well just need to slot the adjusting slots more to be able to
advance it more you use the fly wheel also
Posted: August 30th, 2013, 9:00 am
by jwbronco
Honestly the best swap is to use a CR125 stator and the flywheel from the 250. The grooves from the 125 fit perfectly without modification.