Page 1 of 1
My Custom Airbox mod
Posted: June 1st, 2013, 10:13 pm
by lambofgod85
[/img
[/img]
Airbox mod
Posted: June 1st, 2013, 10:18 pm
by lambofgod85
This is one of my custom mods I have done to my Cr500 A/F airbox. More air= More fuel= More Power
. What do you think of it
Posted: June 2nd, 2013, 9:14 am
by Kuma
looks good, if it were ne I would think about getting some foam inserts that you can clean, oiling would be optional depending on whee you are riding.
Posted: June 2nd, 2013, 12:52 pm
by Roostius_Maximus
I like it, I have been scheeming the same setup, have some sheets of "outerwares" filter screens to go on the outside of my mesh tho.
Posted: June 2nd, 2013, 12:54 pm
by Roostius_Maximus
btw, I cut the front from the filter box and used the 1991-01 cr125/250/500 filter housing and the 500 boot, eliminated the sealing issues of the face mounted af ones
Posted: June 2nd, 2013, 2:34 pm
by cmotodad
In the old days, on our Yamaha's we would use a layer of foam between an inner and outer screen. You could wash the airbox and clean the additional venting at the same time.