PJ Carb Air screw o ring?
Posted: January 5th, 2013, 9:40 pm
As usual I am confused. I have a 2001 Five Hundred. I just soaked the factory PJ carb in Berryman cleaner, used compressed air blowing the shit out of the carb, followed by B12 carb cleaner spray and more compressed air.
My question is; some people reference an o ring on the air screw. I did not find and o ring on the air screw. All I found was the screw a spring and a flat washer. I looked at the manual and microfiche. I cant find any reference to an o ring on the airscrew. Am I TFUAU or are people reference an oring on the air screw for a PWK carb.
BTW: my idle circuit was plugged up. Now all I have to do is get the jetting set for 1250 feet above sea level Phoenix. I have a 55 and a 172 stock needle on fourth clip.
Thx!
My question is; some people reference an o ring on the air screw. I did not find and o ring on the air screw. All I found was the screw a spring and a flat washer. I looked at the manual and microfiche. I cant find any reference to an o ring on the airscrew. Am I TFUAU or are people reference an oring on the air screw for a PWK carb.
BTW: my idle circuit was plugged up. Now all I have to do is get the jetting set for 1250 feet above sea level Phoenix. I have a 55 and a 172 stock needle on fourth clip.
Thx!