Page 1 of 1
New Gorr project
Posted: November 14th, 2012, 4:15 am
by Tharrell
Eric Gorr has embarked on a new big bore Honda project base on the '02-'07 CR250 engines.
Here's the link on TSM.
http://twostrokemotocross.com/2012/11/c ... r-and-fmf/
Posted: November 14th, 2012, 4:58 am
by Mik329
I have his new 295 01 CR250 motor sitting on my shop counter right now. It's going in my 04 CR250, should be a pretty good track bike.
Posted: November 14th, 2012, 12:22 pm
by yota
I have his 265 mo betta ported motor sitting in my 95 CR250 right now. Breadth of usable power is off the scale compared to stock.
Posted: November 14th, 2012, 4:24 pm
by Tharrell
I was surprised to read of the collaboration between Forward Motion and FMF because I thought Eric was gonna retire.
Whatever, glad he's still in it.
Posted: November 15th, 2012, 12:26 pm
by Mik329
I talked to him last month and he said he's going to join with Millinium at first of the year and stay on and run things for his engine mods.
Posted: November 16th, 2012, 9:23 am
by Roostius_Maximus
I talked to him tuesday I think
Posted: November 16th, 2012, 1:10 pm
by Mik329
Posted: November 16th, 2012, 8:06 pm
by Roostius_Maximus
I'd called him, talked for a bit about a few different things, I mentioned the trans ratios were too close and it was pretty speedy to build it like he was, also that the crank didn't have enough mass. He sluffed it off that he had it figured out. I had 2 lines ringing in and had to go, then he calls back, says he's having lunch and wants me to call later to talk about some things. Haven't got back to him, it's been hectic