Page 1 of 1
WTB 02-04 cr250 cylinder
Posted: June 26th, 2012, 8:57 am
by freeride588
Im looking for a clean useable cylinder let me know what you guys have. Thanks alot
Posted: June 26th, 2012, 12:21 pm
by Gmbond
I've got two 03 cylinders, both in need of a replate if you need a core...
Posted: June 26th, 2012, 4:31 pm
by Roostius_Maximus
I need one also
My spare had a sleeve and is cracked.
If there's one left, let me know what it's worth with valves if possible.
Posted: June 26th, 2012, 6:11 pm
by freeride588
Roostius_Maximus wrote:I need one also
My spare had a sleeve and is cracked.
If there's one left, let me know what it's worth with valves if possible.
The bridge on the cylinder is cracked on the one I have does that mean I cannot resleeve it. The exhaust ports are not symmetrical and very thin and jacked up looking.
Posted: June 26th, 2012, 7:29 pm
by Roostius_Maximus
It can be resleeved ya, but it'd need a weld to be re-plated. I'm in the same boat but mine has a chunk missing from the top side if the already cracked sleeve that was installed.
I'm just getting another motor together from my parts shelf