BannedCR500Riders.com

Im working on a gen 2 conversion and bought a Motion Pro seal driver. The shop I bought the driver from had two, the owner said they one of them was missed marked. He gave me the one he "thought" was the right one, but it is a little lose on the tube. I would guess about a 1-2mm lose. Is this right? Or should it be pretty close to a tight fit? The other one was about 1-2mm smaller. There both marked 46-47mm.

Any help would be appreciated. Thanks, Scott.

Should be a snug fit. Enough to slide up and down but loose enough to move. You don't want it causing a crooked install.

Ya, the guy didnt know which one was the right one. I will go back and get the other one. Thanks for your help. Scott