BannedCR500Riders.com

Posted: **March 4th, 2012, 7:45 pm**

Hey guys i am new to the site and starting a conversion on a 2005 crf450x. I got the Y cut out and was trying to figure were to place it and fit the radiaters with no luck. Has any one done a 450X conversion who could give me some pointers? i have looked at a few but no one mentions the rads thanks and sweet site

Posted: **March 4th, 2012, 7:54 pm**

The exhaust port location locates the Y, the Y locates the rads..

Posted: **March 4th, 2012, 9:10 pm**

AlisoBob wrote:The exhaust port location locates the Y..

The 450X rads are to long and will not work. I use the 06 CRF250X rads on all my CRF conversions. On the 450X I cut all 4 rad mounts off the frame. Bolt them to the 250X rads, put the gas tank and shrouds on bolt the rads to shrouds. Shazam!!! thats where you weld the rad mounts back on the frame....

Posted: **March 5th, 2012, 2:27 pm**

thanks for the info guess i will start looking for some new rads thanks again

Posted: **March 8th, 2012, 5:15 pm**

how much different in lenght are 250x to 450x rads

Posted: **March 9th, 2012, 11:00 am**

The 250X rads are 11 1/4 X 5

BannedCR500Riders.com

new hoon!!!!!! with 450X???

new hoon!!!!!! with 450X???