Page 1 of 1

NEW YORK: looking to trade built 05rmz450 for 02-07 cr250r

Posted: February 11th, 2012, 9:25 am
by gixxerbob
sold!!!!

Posted: February 11th, 2012, 2:04 pm
by 2strokeforever
not trying to steer you away, but those cr 250s are a bitch to jet and seem to always have the honda bog.....
a 05+ yz 250 is better than the cr in EVERY way (except looks) from power to suspension, to radiators that dont get squashed first time it gets layed over

Posted: February 11th, 2012, 2:40 pm
by Gmbond
The 05+ Cr250 year range you should be looking for. 02-04 have many subtle differences that make the 05+ better... Everything from chassis bits as small as a wider rear shock bottom bearing, to completely different cylinder and top end and different crank (no tin cans).

02,03,04 all have different cylinders but are interchangeable. A 2005+ cylinder (complete with head and powervalves)can be put onto an older bottom end, but the pipes are different too.

The cheap/quick fix for jetting is a JD kit, install and it's better... I did this years ago and never messed with it again (yet).

The "ultimate" fix is ditch the carb for a Keihin PWK. The Yz250 PWK has the Tps sensor, but a off the shelf PWK will work apparently and just leave the tps unplugged. You need a short body PWK, with the screwed down top, the screw cap top is the long body (the 05+ uses short body, 02-04 will need long body)

Anyways... My offroad enduro and cross country race bike is an 06 Cr250 and I love it with just some playing around. I will eventually be adding a PWK.

Not sure where you are located, but I do actually have an 05 CR250 for sale, but I'm in Ontario Canada.

Anyways hope this helps out a lil

Posted: February 11th, 2012, 3:57 pm
by gixxerbob
2strokeforever wrote:not trying to steer you away, but those cr 250s are a bitch to jet and seem to always have the honda bog.....
a 05+ yz 250 is better than the cr in EVERY way (except looks) from power to suspension, to radiators that dont get squashed first time it gets layed over
you crack me up. i just bought a 06yz250 (with sss suspension) and fully built it cause i heard how great of a bike it is and ended up getting rid of my 2002 cr250.... and then (a week later) i decided that my cr500 swapped trx250r was not for me, i dont do quads.... so i pulled the built cr500 motor out of the quad and now im dying.....DYING to do a gen 3 cr500af. great minds think alike huh

Image
Image
Image
Image

Posted: February 11th, 2012, 4:04 pm
by gixxerbob
Gmbond wrote:The 05+ Cr250 year range you should be looking for. 02-04 have many subtle differences that make the 05+ better...
Not sure where you are located, but I do actually have an 05 CR250 for sale, but I'm in Ontario Canada.
i had a 2002 cr250 and liked the chassis but would love to trade for a 2005+ ....

my dad has a place in cooperstown ny 13326 that i visit every once in a while, thats about as close to canada as i go. are you close to the border? and are you looing to trade?