Page 1 of 2
Another ebay Rip Off Artist
Posted: December 28th, 2011, 6:28 pm
by freeride588
http://www.ebay.com/itm/2001-01-CR500-C ... 35b80b3f76
Check this guy out trying to sell some used cases for over $100 more than new. Scumbag
Posted: December 28th, 2011, 6:57 pm
by 2strokeforever
better than the guy trying to sell the seized and cracked piston

Posted: December 28th, 2011, 7:06 pm
by Roostius_Maximus
still cheaper than buying them new in Canada!

Posted: December 28th, 2011, 7:08 pm
by AlisoBob
2strokeforever wrote:better than the guy trying to sell the seized and cracked piston


x 491.
Too bad I never took a screen shot of that.
Posted: December 28th, 2011, 8:00 pm
by scooter5002
Huh. Expected to see a Toledo address on that. Based on the "scumbag" comment. My bad............no. Not really.
Posted: December 28th, 2011, 9:27 pm
by NightBiker07
If people are stupid enough to buy used cases for more than new cost, then you kind of deserve it :/
But, then again, where are you buying new parts from? Most parts sites list them around 300 bucks a side. after shipping, it would be close to his BIN, although I agree used parts shouldnt come close to a new part in a price, I guess if some moron is willing to pay :/
Posted: December 28th, 2011, 9:47 pm
by freeride588
NightBiker07 wrote:If people are stupid enough to buy used cases for more than new cost, then you kind of deserve it :/
But, then again, where are you buying new parts from? Most parts sites list them around 300 bucks a site. after shipping, it would be close to his BIN, although I agree used parts shouldnt come close to a new part in a price, I guess if some moron is willing to pay :/
$273 a piece. They may not know how to build an AF very well but damn that price is good. Even with shipping which this guy is charging 17 bucks for its still cheaper to get new. Those are in good shape at least they appear to be but they should go for alot less. No bids yet thank god. Just saying pieces of shit like that really piss me off.
Posted: December 28th, 2011, 9:51 pm
by NightBiker07
freeride588 wrote:NightBiker07 wrote:If people are stupid enough to buy used cases for more than new cost, then you kind of deserve it :/
But, then again, where are you buying new parts from? Most parts sites list them around 300 bucks a side. after shipping, it would be close to his BIN, although I agree used parts shouldnt come close to a new part in a price, I guess if some moron is willing to pay :/
$273 a piece. They may not know how to build an AF very well but damn that price is good. Even with shipping which this guy is charging 17 bucks for its still cheaper to get new. Those are in good shape at least they appear to be but they should go for alot less. No bids yet thank god. Just saying pieces of shit like that really piss me off.
Where do you find them for that price?
Posted: December 28th, 2011, 9:56 pm
by freeride588
NightBiker07 wrote:freeride588 wrote:NightBiker07 wrote:If people are stupid enough to buy used cases for more than new cost, then you kind of deserve it :/
But, then again, where are you buying new parts from? Most parts sites list them around 300 bucks a side. after shipping, it would be close to his BIN, although I agree used parts shouldnt come close to a new part in a price, I guess if some moron is willing to pay :/
$273 a piece. They may not know how to build an AF very well but damn that price is good. Even with shipping which this guy is charging 17 bucks for its still cheaper to get new. Those are in good shape at least they appear to be but they should go for alot less. No bids yet thank god. Just saying pieces of shit like that really piss me off.
Where do you find them for that price?
I dare not say the name here

. Read what i wrote after the price one more time

Posted: December 29th, 2011, 4:54 am
by Mik329
That dude lives around the corner from my mom. I sold him a CR500 roller a few years back. His backyard is a freakin mess of parts all over. Reminds of a tweaker trying to clean up and make a living selling parts.
Posted: December 29th, 2011, 5:44 am
by Roostius_Maximus
He tears down atleast 4 bikes a week. I'm on the call list for the 500 parts
I bought the trans from those cases
he'll need to get that much $ to recover from the deal I got on the trans
Posted: December 29th, 2011, 6:23 am
by gregrobo
i bought a shock and linkage dude looked after me cheap and fast
Posted: December 29th, 2011, 7:14 am
by freeride588
gregrobo wrote:i bought a shock and linkage dude looked after me cheap and fast
Even a scumbag knows it's not smart to rip off hoons but obviously he has no problems ripping everyone else off. It pisses me off that this guy is in my general area. Mik did you grow up in San Diego. Im just saying im over these fuckers stripping down good bikes and charging waaayyyy to much. Glad im on this site and know what things should really cost.
Posted: December 29th, 2011, 7:49 am
by Roostius_Maximus
i just looked back in my books and in 2007-2008 i bought 7 transmissions from ebay, all 1993+, I didn't pay more than 60$ for any of them. The price has more than tripled since then.
Posted: December 29th, 2011, 8:07 am
by freeride588
Roostius_Maximus wrote:i just looked back in my books and in 2007-2008 i bought 7 transmissions from ebay, all 1993+, I didn't pay more than 60$ for any of them. The price has more than tripled since then.
Exactly what im saying the cr500 parts world used to be enthusiasts swapping parts to keep there bikes running and now its so called professional bike strippers that are trying to make money off motorcycles. Its going to come to a point where its going to be to much money to get parts to keep our bikes going. Roosty i have $60 can i have one of those trannys.

Posted: December 29th, 2011, 8:32 am
by Roostius_Maximus
HA!, i already need 2 more than i have
Posted: December 29th, 2011, 4:09 pm
by Mik329
freeride588 wrote:gregrobo wrote:i bought a shock and linkage dude looked after me cheap and fast
Mik did you grow up in San Diego.
Yes, grew up in Escondido and lived in Carlsbad and Temecula before moving to GA. Seems I will be stuck with that house in Temecula for a LONG time.

Posted: December 29th, 2011, 6:13 pm
by Roostius_Maximus
Posted: December 29th, 2011, 6:14 pm
by Roostius_Maximus
Posted: December 29th, 2011, 6:15 pm
by Roostius_Maximus
I have an engine using this same set on a newer shaft. took some swapping of washers and shims, has been good for years now.
http://www.ebay.com/itm/1986-86-Honda-C ... 1554wt_952
Posted: December 29th, 2011, 6:16 pm
by Gravel Scratcher
freeride588 wrote:Roostius_Maximus wrote:i just looked back in my books and in 2007-2008 i bought 7 transmissions from ebay, all 1993+, I didn't pay more than 60$ for any of them. The price has more than tripled since then.
Exactly what im saying the cr500 parts world used to be enthusiasts swapping parts to keep there bikes running and now its so called professional bike strippers that are trying to make money off motorcycles. Its going to come to a point where its going to be to much money to get parts to keep our bikes going. Roosty i have $60 can i have one of those trannys.

Yeah and i used to be able to buy 1c lollies as a kid, times change.....move on. I totally agree with you about stripping running bikes for parts but the reality is parts are worth more than whole bikes to guys who dabble in this stuff. I always check new part price first when chasing bits and make a call from there, sometimes its better new other times not and thats where you pay the going rate.
Posted: December 29th, 2011, 6:42 pm
by NightBiker07
freeride588 wrote:NightBiker07 wrote:freeride588 wrote:
$273 a piece. They may not know how to build an AF very well but damn that price is good. Even with shipping which this guy is charging 17 bucks for its still cheaper to get new. Those are in good shape at least they appear to be but they should go for alot less. No bids yet thank god. Just saying pieces of shit like that really piss me off.
Where do you find them for that price?
I dare not say the name here

. Read what i wrote after the price one more time

I see. I thought you were referring to the Ebay seller with that statement
Posted: December 29th, 2011, 9:09 pm
by 100hp honda
some dickwad selling 15yo used bearings

. want to send him a lovely email but dont want to tarnish my 100% rating

Posted: December 30th, 2011, 7:32 am
by Rhino89523
Hey it's just how it is. If you don't like his price...don't buy it, so simple. As far as stripping bikes goes thats also just how it is. Over on the other site the Sinister racing Dude was looking for like 1400 for his really nice Steely. I told him dude part it out you will get more than that. My buddy bought his GPR set up for $300, I bought his rims for $300, someone bought his motor for like $1200 he was $400 ahead before he even got going. Nobody offered him shit for the whole thing.
Posted: December 30th, 2011, 7:43 am
by freeride588
Rhino89523 wrote:Hey it's just how it is. If you don't like his price...don't buy it, so simple. As far as stripping bikes goes thats also just how it is. Over on the other site the Sinister racing Dude was looking for like 1400 for his really nice Steely. I told him dude part it out you will get more than that. My buddy bought his GPR set up for $300, I bought his rims for $300, someone bought his motor for like $1200 he was $400 ahead before he even got going. Nobody offered him shit for the whole thing.
True its crazy how it works these days.