01 500 needle

quicfix500 · Post by **quicfix500** » July 11th, 2011, 3:44 pm

Went to pismo july 9-10 and have needle question, 01 500 newly rebuilt,ported,rad valve,250 ign,pc pipe. 200 main with dgn, 55 pilot. top end jetting perfect up the hills WFO! problem is the dgn on bottom clip runs consistently lean till its out of the way, does not surge, just thirsty. tried dgk and bottom is better. it needs a needle thats the same but richer. suggestions please!

Rhino89523 · Post by **Rhino89523** » July 11th, 2011, 4:27 pm

It's the dunes, just keep it wide open!!! JK man I suck at jetting, Bob is pretty much the man with jetting and might be able to help but it seems most guys who are chasing down jetting throw the stock carb in the trash can and go with the PWK..good luck others will chime in.

britincali · Post by **britincali** » July 11th, 2011, 4:51 pm

200 main is stupid.

No fukin way in the world is that bike making anywhere near the power it should.

Post by **AlisoBob** » July 11th, 2011, 5:29 pm

britincali wrote:200 main is stupid.

No fukin way in the world is that bike making anywhere near the power it should.

Yup..... maybe with something oxygenated like VP113 a #200 works, but not on regular gas.

I dont understand your post. You said the DGN runs too lean, but its too thirsty at the same time?

Whats wrong with the DGK?

quicfix500 · Post by **quicfix500** » July 11th, 2011, 5:59 pm

Thank you Bob! went to pismo sat july 9-10. i'm trying to get this bitch jetted before upcoming Pismo ride with gang. all i got from Brit is ba ba ba!. i'm running 50/50 sunoco 110 with 91 gas. runs fine at wfo with the 200 main,dgn bottom clip setting. ran fine at hollister hills wfo with 185 main,dgn bottom clip on memorial day. it runs smooth but lean when you run on the needle, very bottom is fine, top is great. its the needle range thats the problem. the dgk is good at bottom then leans out the rest of its range. do i need a egk? is taper more important than length? i dont want to blow up when i endo in the sand in front of everyone. i guess it

wont because the main is good!

100hp honda · Post by **100hp honda** » July 11th, 2011, 9:29 pm

ive used 185 at glamis in mid summer and it worked good so its possible 200 could be in the ballpark at pismo depending on temp and other things. if it aint blubbering then your not too far off.

its pain in the ass messing with jets at the dunes but if you put in 1 or 2 sizes bigger and find that blubber point then go down 1 or 2 and youll be safe. if you want to be a hero go down a couple more sizes but theres always risk of seize in the sand. memorial day i ran the snot out of mine 600' wide open up sand mountain about 30 times. 1 size below where it had slight blubber and it worked good. could of dropped one more i supposed but it wasnt worth fukin with. wasnt there to prove anything

britincali · Post by **britincali** » July 11th, 2011, 11:20 pm

58 pilot, 175 main and whatever the stock needle is runs titties at pismo, lets line em up there, I guarantee Ill rape your 200 main.....

100hp honda · Post by **100hp honda** » July 12th, 2011, 12:21 am

maybe he has fernco airfilter

. 200 would drown my shit. 170 wont even clean out up here

lewisclan · Post by **lewisclan** » July 12th, 2011, 7:49 am

so it looks like there will be some racing going on

britincali · Post by **britincali** » July 12th, 2011, 8:10 am

Oh helll yes!

I got my nitrous tank filled too

plynn41 · Post by **plynn41** » July 12th, 2011, 9:56 am

Shoot, I'm running a 162 main on my bike. No sand dunes around here, but hot as hell.

quicfix500 · Post by **quicfix500** » July 12th, 2011, 10:23 am

britincali wrote:58 pilot, 175 main and whatever the stock needle is runs titties at pismo, lets line em up there, I guarantee Ill rape your 200 main.....

Of course you will because mine blew up! i'm trying to get it to run right and have fun out there with you guys and all i get is dumbass remarks! what a squid! thanks for nothing.

britincali · Post by **britincali** » July 12th, 2011, 10:51 am

A squid I am

britincali · Post by **britincali** » July 12th, 2011, 10:52 am

quicfix500 wrote:
britincali wrote:58 pilot, 175 main and whatever the stock needle is runs titties at pismo, lets line em up there, I guarantee Ill rape your 200 main.....
Of course you will because mine blew up! i'm trying to get it to run right and have fun out there with you guys and all i get is dumbass remarks! what a squid! thanks for nothing.

The "dumbass" remark is exactly what you need to get your bike in the ballpark of running rite, if you want to get all butt hurt and sensative then fuckoff to www.cr500riders.com

Post by **AlisoBob** » July 12th, 2011, 12:05 pm

Yup

lewisclan · Post by **lewisclan** » July 12th, 2011, 12:40 pm

Ouch, but just for the record I have bikes that I have ran a 210 in and it runs a 200 at pismo

Rhino89523 · Post by **Rhino89523** » July 12th, 2011, 3:44 pm

Just get her close and run it... If it pings fatten it up a bit if it blubbers lean her out. Brit's running Nitrious so no matter what you do his bike is going to be faster so the only hope to wax fools will be on Skills. I am certainly not the king of the dunes or jetting but my bike runs good enough that when I get smoked it usually has nothing to do with the bike and everything to do with the pilot....not the pilot jet. Also don't get too worked up over the internet Banter, most people are super cool in person. You have to be a little cocky to think the bike for you is a CR500 so of course that comes with some lip. Look in the Pismo upcoming ride post where I ask "what I should bring?" and the reply is "a good attitude"

iggys-amsoil · Post by **iggys-amsoil** » July 12th, 2011, 4:03 pm

Ok Brit your on.

People trip when I tell them I have a 62 pilot and sometimes it a little surggy and to make most of it go away is 1/4-1/2 turn out on a PJ at Pismo. But then this cylinder is ported,... say differently.

Also using a EGH needle and 172 main. If I use a D.. needle she will ping at the 3/4 range garunteed?

Unless a cylinder is perhaps ported for top end I don't see having to go more than 180/185?

britincali · Post by **britincali** » July 12th, 2011, 5:05 pm

Rhino89523 wrote: Brit's running Nitrious so no matter what you do his bike is going to be faster so the only hope to wax fools will be on Skills.

The AF aint got nitrous, just a clapped out 87 motor, Ill be waxing peeps on that

britincali · Post by **britincali** » July 12th, 2011, 5:06 pm

iggys-amsoil wrote:Ok Brit your on.

Bring it old man

lewisclan · Post by **lewisclan** » July 12th, 2011, 8:35 pm

Iggys bike has allways been fast and he can ride, Ill put a pitcher of Mai Tai's on the best 2 out of three

quicfix500 · Post by **quicfix500** » July 12th, 2011, 10:34 pm

The "dumbass" remark is exactly what you need to get your bike in the ballpark of running rite, if you want to get all butt hurt and sensative then fuckoff to www.cr500riders.com[/quote] Damn it Brit, don't be so sensitive. one dumbass remark and your all upity. if i don't get this bitch running right, i take it your gonna help me work it out. right? If yes, thank you. if not you fuck off to www.cr500riders.com. can i stay at your camp site i like your spunk?

britincali · Post by **britincali** » July 12th, 2011, 11:24 pm

Not my campsite and its open to all non whiners.

Rhino89523 · Post by **Rhino89523** » July 13th, 2011, 7:24 am

britincali wrote:
Rhino89523 wrote: Brit's running Nitrious so no matter what you do his bike is going to be faster so the only hope to wax fools will be on Skills.

The AF aint got nitrous, just a clapped out 87 motor, Ill be waxing peeps on that

Those early motors were fast, my clapped out '86 motor I think would put the spank down on the motor I have now.....It's shaping up to be a good weekend of shit talking and drag racing

Post by **AlisoBob** » July 13th, 2011, 8:49 am

lewisclan wrote:Iggys bike has allways been fast and he can ride, Ill put a pitcher of Mai Tai's on the best 2 out of three

X 2

( Sorry Brit)

BannedCR500Riders.com

01 500 needle

01 500 needle