Page 1 of 1
2006 crf250 frame conversion
Posted: April 24th, 2011, 4:12 pm
by AdmirableSoup
I started my conversion today. I have decided to replace the entire cradle with the help of Soild Bro... (When i get the funds
) I can already tell i will learn allot from this. More to come.
Re: 2006 crf250 frame conversion
Posted: April 24th, 2011, 4:19 pm
by AlisoBob
AdmirableSoup wrote:I can already tell i will learn allot from this. More to come.
Thats the WHOLE IDEA of thsi site......
( Well, that and girls, tits, riding, ass , booze, broads, guns, comedy, etc...etc....)
Posted: April 24th, 2011, 5:39 pm
by AdmirableSoup
+1
After the cutting..
Posted: April 25th, 2011, 4:47 pm
by AdmirableSoup
Do I cut below the welds on the Y section to get the ends of the cradle and down tube out? I figured if i did it would weaken the total strength of the Y by taking away too much material.
Did anyone find white crystals inside the down tube when they cut it.. It was kinda weird when i cut the tube it hissed and some potient smelling fluid leaked out...
Posted: April 26th, 2011, 8:10 pm
by AMA714
mine was spotless...
As far as cutting below the weld. I cut just at the base of the weld. making sure I had a decent amount of pocket left. Here is the amount of downtube that I had to remove.
[img
[/img]