Page 1 of 1
Anyone have a jig for sale?
Posted: December 15th, 2010, 11:18 pm
by kcbmx
Hi guys, this is my first post here so bare with me lol. Im looking for a jig to finally finish my af(goint on 2 years
) finally and just wanted to get everything dialed.ive searched everywhere and I am aware that there is a fellow here who used to make them. Anyhow, if you have one or know where i can get one, i would really appreciate it. let me know how much.
Posted: December 16th, 2010, 12:08 am
by AlisoBob
PM Solid Bro
Posted: December 19th, 2010, 9:55 pm
by kcbmx
No reply:(
Posted: December 20th, 2010, 4:13 am
by Tharrell
I was gonna get a jig for future use but my buddy Sam said jigs don't do good around here.
Posted: December 20th, 2010, 7:06 am
by Mik329
Tharrell wrote:I was gonna get a jig for future use but my buddy Sam said jigs don't do good around here.
out of about 50 jigs I made I had one that was off (apperently warped during welding somehow). I offered to send him another jig or refund the money which I did.
Posted: December 20th, 2010, 7:49 am
by nmdesertrider
In my experience if you are doing it yourself you can weld 2/3 of it with case halves in there and then finish up without a jig- nice to have but not a requirement.
Posted: December 20th, 2010, 9:54 am
by kcbmx
someone has to have one for sale, pm me if you are. im paypayl ready:)
Posted: December 20th, 2010, 10:10 am
by Tharrell
Posted: December 20th, 2010, 10:13 am
by pstoffers
nmdesertrider wrote:In my experience if you are doing it yourself you can weld 2/3 of it with case halves in there and then finish up without a jig- nice to have but not a requirement.
In my experience you can get the job done with out the proper tool but she sure likes the proper tool
Posted: December 20th, 2010, 10:34 am
by AlisoBob
Posted: December 20th, 2010, 11:15 am
by Mik329
Tharrell wrote:
dude, you're an asshole. your friend kept it professional why can't you?
Posted: December 20th, 2010, 11:18 am
by Mik329
kcbmx wrote:someone has to have one for sale, pm me if you are. im paypayl ready:)
Sorry kcmbx, I have plenty of metal just no time for them right now. I'd be happy to send you the proper sized metal for the mounts if you want to weld one up yourself. Just pm me again if that works. Otherwise, there are a bunch of guys on here that have them (good ones) and maybe someone will lend you one.
Posted: December 20th, 2010, 12:09 pm
by AlisoBob
I called soliD, and told him to check his PM's....
Posted: December 20th, 2010, 12:33 pm
by Tharrell
That's what he was talking about.
Don't really want to get into a pissing match on the internet with someone I don't know, it's too easy to get out of hand.
btw-We're all a bunch of professionals on here, I humbly apologize.
Posted: December 20th, 2010, 5:37 pm
by "SOLID Bro!!"
AlisoBob wrote:I called soliD, and told him to check his PM's....
Done, Thanks bob it was a different guy.
Posted: December 20th, 2010, 7:11 pm
by kcbmx
got a pm from solid
