Brit, still a work in progress on mine. I get easily side tracked onto other bikes (twice) then went on a holiday for a couple of months
....ah then i bought a steely which has kept my attention for a while but gotta admit when i saw your pick up it has sparked my interest in finishing this AF.
Tank wise i went with a IMS 2.7 gal. fits ok but i had to enlarge the holes were the shroud mounts to the tank. I'm just going to plate over the hole
where the fuel pump goes, maybe recess a pocket for the plug.
I had a look around for that wacky tubing on the rails but ended up getting some 25*25mm from Shaggy but if you find that tubing let us know cause i like the
look of it and would prefer to use it. The L/H swingarm spacer is 46mm and R/H 54mm. The rear shock is
real close to the back of the motor and will probably need to be scalloped or find a smaller diameter spring ??
The Y will need to be raised
The distance from the bottom of the radiator to upper curve on the Y is 80mm
I did a fair bit of chin wagging with Shaggy and his X version is pretty close to the R in a lot of areas hence his frame rails and motor mounts,
they mount in slightly different spots due to different frame dimensions.
Paul
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
"the game of life of is not so much in holding a good hand as playing a poor hand well"
