Page 3 of 5
Posted: January 27th, 2010, 9:10 pm
by RideRed
ellett wrote:Putting CoolHeads on dorks:
I just about fell out of my chair laughing!
It could be kind of a backhanded remark towards AlisoBob...
But that guy in the pic is King Webrider if you have seen any of his threads on AllThingsMoto...
Posted: January 31st, 2010, 7:58 pm
by M.F.D.B.
Ellet, you forgot the Cool Head of me in front of my CBR1000RR!! WTF man? That was classic!
As far as the "topic" if you bleed out the air you loose the progressive part of your valving...
Posted: February 1st, 2010, 5:01 am
by Tharrell
This site is funny, glad I joined.
I had thought a pressure check valve would work sorta like the check valve on my compresser. Don't know much about them though. Smarter minds on here. Guess if it were an option, it would have already been done.
Posted: February 1st, 2010, 5:42 am
by Roostius_Maximus
i use "easy gif animator" it was free and i can mess with speed of each layer beeing displayed, working on something now, but not having time to finish
Posted: February 7th, 2010, 10:50 pm
by ellett
M.F.D.B. wrote:Ellet, you forgot the Cool Head of me in front of my CBR1000RR!! WTF man? That was classic!
Almost, but I didn't want anyone to think you were in the same league of doucheness as Ol' 2k....
Let me see if I can find it.
Posted: February 7th, 2010, 11:00 pm
by ellett
How's that, MFDP?
Posted: February 8th, 2010, 7:33 am
by AlisoBob
ellett wrote:How's that, MFDP?
Friggin' Gangsta' of Sin City....
Posted: February 8th, 2010, 7:19 pm
by M.F.D.B.
Thats right my niggas!!
Posted: February 8th, 2010, 10:29 pm
by CR500R7
Posted: February 9th, 2010, 8:11 am
by M.F.D.B.
Posted: February 9th, 2010, 8:57 am
by dannygraves
LMFAO! I forgot about that one!
Posted: February 24th, 2010, 7:15 pm
by thurmanmerman91
I have to back up Jake on this, I rode 2 different bikes with this setup a few weeks ago and wont run anything else now.The initial part of the stroke is unbelieveably plush...the person that came up with this idea definitely knows what hes doing mechanically and this setup works.No problems whatsoever. Nuff said....
Posted: February 24th, 2010, 8:07 pm
by M.F.D.B.
thurmanmerman91 wrote:...the person that came up with this idea definitely knows how to jerry rig something rather than do it the right way....
FIXED!!
Posted: February 24th, 2010, 8:32 pm
by caseyracing222
thurmanmerman91 wrote:I have to back up Jake on this, I rode 2 different bikes with this setup a few weeks ago and wont run anything else now.The initial part of the stroke is unbelieveably plush...the person that came up with this idea definitely knows what hes doing mechanically and this setup works.No problems whatsoever. Nuff said....
And Im sure your suspension doesn't bottom out either.... My suspension was set up to my liking before I installed these and I like it even more now
Posted: February 24th, 2010, 8:43 pm
by JBaze
caseyracing222 wrote:thurmanmerman91 wrote:I have to back up Jake on this, I rode 2 different bikes with this setup a few weeks ago and wont run anything else now.The initial part of the stroke is unbelieveably plush...the person that came up with this idea definitely knows what hes doing mechanically and this setup works.No problems whatsoever. Nuff said....
And Im sure your suspension doesn't bottom out either.... My suspension was set up to my liking before I installed these and I like it even more now
If it's that much better now, go down about 2 spring rates and take Slow Old Farts mechanical genius off of your bike
Posted: February 24th, 2010, 8:55 pm
by M.F.D.B.
Twin Chambers FTW! I have Merge progressive compression valve springs along with Race Tech G2R valves. Super plush yet hard to bottom and still have the proper progressive air cushion...
Posted: February 24th, 2010, 9:47 pm
by NightBiker07
I cant believe this topic is still alive........
like everyone said, if you want your suspension softer, revalve it and get softer springs. i can only imagine that now that suspension would suck ass on a track if you were moving remotely fast.
Posted: February 25th, 2010, 12:06 am
by CR500R7
M.F.D.B. wrote:thurmanmerman91 wrote:...the person that came up with this idea definitely knows how to jerry rig something rather than do it the right way....
FIXED!!
You are a funny Dude.
Posted: February 25th, 2010, 7:03 pm
by thurmanmerman91
think whatever you want about this setup haha im doin what works for me...
Posted: February 25th, 2010, 7:19 pm
by JBaze
And then when all the rear sproket teeth start all laying over due to wear, just flip the sproket and turn the chain upside down
Posted: February 25th, 2010, 7:49 pm
by AlisoBob
thurmanmerman91 wrote:think whatever you want about this setup haha im doin what works for me...
Posted: February 25th, 2010, 7:57 pm
by MojoScojo
With all this discussion, Supermoto Spike comes to mind. That's a depressing story I'll leave to someone else.
I stole this from
here.
The theory behind sub tanks:
Sub-Tanks add a new dimension to the adjustability of your fork. The air volume in your fork is in effect an air spring. This is what helps your fork resist bottoming. Oil level controls the amount of air in the fork. The higher the oil level is the smaller the air volume making the air pressure in your fork ramp up faster on big hits. High oil level makes for a harsh ride on small bumps, but helps resist bottoming. Sub tanks allow you to run a high oil level and maintain a softer ride than normal on small bumps.
This is accomplished with adding back air volume with the tanks. Then controlling the flow of air into the tanks with a control valve. This system is more volume sensitive then speed sensitive. On small bumps, (like roots, rocks, and ruts), the smaller volume of air easily moves through the valve and into the tank. This makes the forks feel like they have a low oil level. On big hits , (such as whoops, g outs and jumps), the large volume of air cannot all squeeze through the control valve at once. This makes the fork act like it has a high oil level and will resist bottoming in the same way. With the control valves you have another way of tuning your suspension for different conditions. Open the valves for a softer ride. Close them down for a firmer ride. Sub tanks give a bike a plush feel without sacrificing bottoming resistance. I think they really shine for trail riding. But motocross and even supercross / arenacross guys love them too for chattery stuff like braking and acceleration bumps and ruts.
So, in short, the oil damping is a fixed rate thing as is the spring. The Air damping is progressive and provides you the ability to "tune" your suspension. By removing this element, you also remove your bottoming protection. A very dangerous condition if you think about it.
Let's go back to some simple physics. Say you have a nail, a standard hammer and a rubber mallet. When you hit the nail with the standard hammer, there is no give and velocity of the hammer is transferred to the nail. Hit the same nail with the rubber mallet and the mallet absorbs the energy and rebounds. Translate this to your forks. The air volume is the rubber component of your mallet, you are the nail. Without it, the first big hit you take, your bike is gonna drive you like that nail. If you are NEVER going to get airborne or take a high speed hit, you will probably be none the wiser. Don't be stupid. Eventually, you will find yourself in that situation and have forgotten all about what you have done to your forks. When that time comes, and it WILL come, you will be hurting in a MAJOR way and my conscience will be clear.
Posted: February 25th, 2010, 8:00 pm
by MojoScojo
I'm looking at you Thurman...
16 years old...
http://www.bannedcr500riders.com/board/ ... php?t=8362
Don't go buying into a bad idea just because "I tried it and it works great".
Motorcycle engineers designed them this way for a reason. Them Honda guys are pretty fuggin smart. Smarter than a 16 year old I'd wager.
Posted: February 25th, 2010, 10:52 pm
by M.F.D.B.
Im wondering if I should go out and patent this awesome idea before Mr. Stewart's suspension guy hears about this and beets me to it?
Posted: February 25th, 2010, 10:59 pm
by CR500R7
I wouldn't bother Ive already got the patent on that idea, soon I will be sending legal notice to everyone useing that idea or trying to sell it.
