Big J

aloha450x · Post by **aloha450x** » June 22nd, 2008, 4:27 pm

haha is there anything work a shit on that motor? got an address. I have a vodka bottle liter of gas and a old sock.

dannygraves · Post by **dannygraves** » June 22nd, 2008, 4:34 pm

teemtrubble · Post by **teemtrubble** » June 22nd, 2008, 4:51 pm

hmmmm...

ISBB · Post by **ISBB** » June 22nd, 2008, 7:00 pm

Hey danny i know where there is a 97

dannygraves · Post by **dannygraves** » June 22nd, 2008, 7:09 pm

how much do you want for you '97 bottomend?

100hp honda · Post by **100hp honda** » June 22nd, 2008, 7:37 pm

my bike was previously owned by a tard. it had rusted swingarm bearings among other things, luckily the motor was still ok because he probly too stupid to know how to pop it open. other than leaving the oil fill cap off when its raining outside, how the fuk do you get the tranny full of water ?

dannygraves · Post by **dannygraves** » June 22nd, 2008, 7:47 pm

I would guess through the waterpump... if both seals are blown, I imagine quite a bid could get in the motor... the weephole is pretty small.

dannygraves · Post by **dannygraves** » June 22nd, 2008, 7:50 pm

clyde, you got me thinking, so I just went outside and looked...

weephole was plugged!!!!

ISBB · Post by **ISBB** » June 22nd, 2008, 8:08 pm

dannygraves wrote:how much do you want for you '97 bottomend?

Gimme a call one day and we can talk

Maybe work out some sort of barter agreement

100hp honda · Post by **100hp honda** » June 22nd, 2008, 8:09 pm

i didnt think about both seals going bad. i read back previos posts and it seems like that motor you bought sat in a garage for a long time and probly why the rust started. nobody ever changed the oil in that bike or they would of noticed the water, then again they might of been to stupid to realize it was water. sucks to here your bad luck dude

dannygraves · Post by **dannygraves** » June 22nd, 2008, 8:13 pm

its cool man, you live you learn, right?
isbb...ring...ring

aloha450x · Post by **aloha450x** » June 22nd, 2008, 8:42 pm

some people never learn you can't do shit like this to people. if it happened to me I would be on a plane. it principle. gotta crank. lol

pstoffers · Post by **pstoffers** » June 22nd, 2008, 8:56 pm

I tried to call from two different phones with no answer will keep trying...
Do I need to get some of my friends and go over there? I do know where he lives

dannygraves · Post by **dannygraves** » June 22nd, 2008, 9:00 pm

pstoffers wrote:I tried to call from two different phones with no answer will keep trying...
Do I need to get some of my friends and go over there? I do know where he lives

thanks man

but I don't really think its needed...
The cool thing is UPS is sending me a check for the shipping damage, so I'm gonna come out at a minimal loss. But his bad Karma is gonna last quite some time!

pstoffers · Post by **pstoffers** » June 22nd, 2008, 9:05 pm

ellett · Post by **ellett** » June 22nd, 2008, 9:08 pm

Looks like his banner pics need to be updated:

pstoffers · Post by **pstoffers** » June 22nd, 2008, 9:12 pm

dannygraves · Post by **dannygraves** » June 22nd, 2008, 10:39 pm

M.F.D.B. · Post by **M.F.D.B.** » June 23rd, 2008, 12:10 pm

Dude, Marshalls cousins 500 had a SHEET METAL SCREW in the wheep hole!! Talk about some DUMBASS previous owners!!

dannygraves · Post by **dannygraves** » June 23rd, 2008, 12:19 pm

M.F.D.B. wrote:Dude, Marshalls cousins 500 had a SHEET METAL SCREW in the wheep hole!! Talk about some DUMBASS previous owners!!

freaken RETARDS!!! Oh well, they are the ones selling complete bikes that they can't get started for $340 to brit..

M.F.D.B. · Post by **M.F.D.B.** » June 23rd, 2008, 3:30 pm

dannygraves wrote:
M.F.D.B. wrote:Dude, Marshalls cousins 500 had a SHEET METAL SCREW in the wheep hole!! Talk about some DUMBASS previous owners!!

freaken RETARDS!!! Oh well, they are the ones selling complete bikes that they can't get started for $340 to brit..

If I remember right, Brit is one of those retards. I seem to remember a trip to Dumont not too long ago when you had to start his bike for him?? HAHAHAHA

dannygraves · Post by **dannygraves** » June 23rd, 2008, 3:53 pm

HAHAHAHA

britincali · Post by **britincali** » June 23rd, 2008, 4:50 pm

dannygraves · Post by **dannygraves** » June 30th, 2008, 5:37 pm

Just thought you guys would like to know, I just got $$$ from UPS $329, since I paid bigjay $350 for the motor and $30 for shipping, I'm only out like $50 for the engine core. I went through everything and ordered everything I need to make it nice including all bearing and seals, etc. for $220, so I guess for $300 and a lot of work I will have a nice rebuilt motor... So I'm stoked it all seems to have worked out. I still need a couple parts, but some fellow hoons have really hooked me up with the little stuff, al0ha sent me the water elbow and Mike sent me some waterpump parts and a cdi ( I owe Mike if I don't make Pismo

)!

we've got some killer hoons here that really make up for the 1 shitty one...

teemtrubble · Post by **teemtrubble** » June 30th, 2008, 6:18 pm

There's points and they're compounded weekly you know how it is...

BannedCR500Riders.com

Big J