Billet ignition covers
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
The order will likely be done in a couple of weeks, maybe by Christmas. PayPal Roosty, do it as a gift to avoid fees, apparently. He posted that a little earlier in this thread. $100 Canadian per cover, plus freight to your destination. Likely Adam will handle this once they are made, I will probably be dropping them off with him. Long story, very boring. Cheers guys.
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
i havent heard
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
Ok hoons, here's the word. Spoke to my guy, they didn't do anything over the holidays. He expects the covers will be done by the end of next week. I will be west of Roosty by then, 1700 miles west of my hometown. I'll just get the covers shipped directly to Adam, he can ship them to everyone. So please make sure Adam has your money, as well as the shipping costs.
Mike, I still have your address, will have yours shipped direct, as well as your sample copy. How many sets did you want?
Mike, I still have your address, will have yours shipped direct, as well as your sample copy. How many sets did you want?
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Tomorrow the 5th I leave for a week, I doubt i'll get much accomplished on the friday that i get back.
I'll try to keep up to things but I'm not certain of the internet where i'm going
I'll try to keep up to things but I'm not certain of the internet where i'm going
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Don't get worried about the $, scooter had me setup as a 3rd party so guys wouldn't get nervous about their $.
It's sitting in the PayPal account yet waiting for physical parts before moving on to scooter.
I did talk to mrs.scooter last week and she knew he had them in the works but he's out in saskatchewan working and like I've said that place is known for shit cellular service.
Sasktel
It's sitting in the PayPal account yet waiting for physical parts before moving on to scooter.
I did talk to mrs.scooter last week and she knew he had them in the works but he's out in saskatchewan working and like I've said that place is known for shit cellular service.
Sasktel
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
I cant believe it .... i swore to my self id not get to excited about these covers as they never ever get off the ground, but ive gone fkcd it all up .... im hanging out for these bloody things .... where are they.
"not speeding officer".....qualifying
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
As we were originally told that we might get these before Christmas 2011, I thought February 2012 was a good time to check for a progress update . . . . . . I really need these now, got a crack in my clutch cover, and no Oring in my ignition cover . . . . . Come on Scooter, we're all champing at the bit now !
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
Ok lads, here's the word. I have been working in the oilpatch in Saskatchewan. In the middle of FUCKING NOWHERE! I've had access to a computer twice since I've been here. I'm flying home on the 12th for 4 days, will try to get this resolved and sent to Adam for shipment. No one is going to get stung, I don't have nor will I have access to the money guys have sent. Adam has it, and I will arrange payment to the machinist. Hang on guys, this will happen. I don't even have a house to live in, I'm camped out in my truck 7 days a week. Been a little busy hereis all. Cheers guys,
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
Another update
Ok lads, here's how it stands. Made a phone call, those fuckin' covers aren't even MADE yet. Called him right after I posted Monday, said they would be probably be run next week. Likely only because I called him to jog his memory. I commented on this in my first post on this, and I do apologize, guys. I was afraid this would happen, and it has. I was worried I was the hold up, and I'm not. Wow! There's a first. Lol. I'll do what I can when I'm home to force the issue, I told him guys all over the world are waiting on these covers. Do what I can.
Yes Mike, it is worth it. Making good money and very stress free life. NOT like in Toronto. Or as I like to call it, "The Asshole of the FUCKING COUNTRY!" Will try to have your cover shipped direct from my guy, plus your sample. Cheers!
Yes Mike, it is worth it. Making good money and very stress free life. NOT like in Toronto. Or as I like to call it, "The Asshole of the FUCKING COUNTRY!" Will try to have your cover shipped direct from my guy, plus your sample. Cheers!
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
Scoot ... dont be hard on your self ....
Your not the 1st to try this, theres folks out there with the CAD but wont, lend ,share, use or make'm ..... your doing GOOD,
In my oppinion.
Your not the 1st to try this, theres folks out there with the CAD but wont, lend ,share, use or make'm ..... your doing GOOD,
In my oppinion.
"not speeding officer".....qualifying
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
Ahhh, so true about toronto...
That'd be awesome if you can get mine sent from Ontario, but it doesn't really matter that much if they have to come from Manitoba... Or If there is somewhere I can even make a road trip some time to tobacco country...
Just lemme know what needs to happen... I'm not stressing until it gets a lot closer to riding season.
That'd be awesome if you can get mine sent from Ontario, but it doesn't really matter that much if they have to come from Manitoba... Or If there is somewhere I can even make a road trip some time to tobacco country...
Just lemme know what needs to happen... I'm not stressing until it gets a lot closer to riding season.
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
Well gentlemen, here's where it stands as of today. Went to see my buddy, and the program has been generated. So the hard part is done. BUT. He says the actual machine work will take place end of NEXT week. Told me 2 weeks ago end of THIS week. However, 2 weeks ago, the program didn't exist. So that's a positive step. I found out today though, he also lost a man, so that didn't help him any. So hopefully, end of next week it's on.
I now have a new I-Phone that will work where I'm hanging out now, so I can harass the SHIT out of him, and also keep Roosty in the loop. Got E-mail, internet, all the handy shit. Hell, I'll have a fucking PHONE now. Still looking for the little hand that comes up and jacks me off on demand. Haven't found it, but trust me, I'm LOOKING! Knowing Apple, I'm sure it's there. They are pretty creative, from what I've seen so far.
So hopefully it will happen soon. I've stressed to him that guys from all over the world (Does Hoboken N.J. qualify?) are waiting on this and some PREPAID back in December. Bear with me, I leaned on him today.
I now have a new I-Phone that will work where I'm hanging out now, so I can harass the SHIT out of him, and also keep Roosty in the loop. Got E-mail, internet, all the handy shit. Hell, I'll have a fucking PHONE now. Still looking for the little hand that comes up and jacks me off on demand. Haven't found it, but trust me, I'm LOOKING! Knowing Apple, I'm sure it's there. They are pretty creative, from what I've seen so far.
So hopefully it will happen soon. I've stressed to him that guys from all over the world (Does Hoboken N.J. qualify?) are waiting on this and some PREPAID back in December. Bear with me, I leaned on him today.
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
I was planning on calling him Thursday to find out.
I stay busy with work and really dont think about much
other than that when Im trucking. Its my regular day off
though so it was on my to do list. However he made a
comment that "Watch itll warm up and everyone will
want to ride". Oh so MY project which has been booked
for 2 months gets shelved AGAIN?! What the FUCK?
Bear with me guys. Im furious but I want this done
because a lot of guys are waiting on these. Will update
asap.
I stay busy with work and really dont think about much
other than that when Im trucking. Its my regular day off
though so it was on my to do list. However he made a
comment that "Watch itll warm up and everyone will
want to ride". Oh so MY project which has been booked
for 2 months gets shelved AGAIN?! What the FUCK?
Bear with me guys. Im furious but I want this done
because a lot of guys are waiting on these. Will update
asap.