BannedCR500Riders.com

Posted: **June 28th, 2008, 3:58 pm**

Danny weld that thing?

Posted: **June 28th, 2008, 3:59 pm**

Posted: **June 28th, 2008, 4:14 pm**

shit, those do look like my welds!

Posted: **August 8th, 2008, 7:44 pm**

AlisoBob wrote:$500+, alot?

Modding the plastic tanks was like, $20

What did you use to mod that tank?

Posted: **August 10th, 2008, 4:03 pm**

So.... my tank has been dripping for a while... both at the Pinnicles and Pismo rides.

I thought it failed, so I have been kicking around the idea of constructing an Alloy one.

I finally found time to pop it off today....

SURPRIZE!

Its only a pin hole, rubbed through on the bottom by making contact with the right side water outlet.

I'll fix it, and give it another go.

Perhaps it is a workable idea after all......

Posted: **August 10th, 2008, 4:56 pm**

AlisoBob wrote:So.... my tank has been dripping for a while... both at the Pinnicles and Pismo rides.

I thought it failed, so I have been kicking around the idea of constructing an Alloy one.

I finally found time to pop it off today....

SURPRIZE!

Its only a pin hole, rubbed through on the bottom by making contact with the right side water outlet.

I'll fix it, and give it another go.

Perhaps it is a workable idea after all......

Posted: **August 11th, 2008, 12:03 pm**

Bob i gotta question...I was trying to locate some 3/8'' lexan sheet for my airbox mod, but could only find 1/4''...boot distance to airbox should be good but i was just wondering if you felt that 1/4'' was too thin for the application?

Posted: **August 11th, 2008, 12:09 pm**

I think 1/4" will put the boot too close to the shock.

What city are you in??

Posted: **August 11th, 2008, 12:19 pm**

Mcmaster-Carr supply

Posted: **August 11th, 2008, 12:19 pm**

AlisoBob wrote:So.... my tank has been dripping for a while... both at the Pinnicles and Pismo rides.

I thought it failed, so I have been kicking around the idea of constructing an Alloy one.

I finally found time to pop it off today....

SURPRIZE!

Its only a pin hole, rubbed through on the bottom by making contact with the right side water outlet.

I'll fix it, and give it another go.

Muggy rod?

Perhaps it is a workable idea after all......

Posted: **August 11th, 2008, 12:23 pm**

teemtrubble wrote:Mcmaster-Carr supply

Their catalog gets any thicker, it'll need it's own shelf.

Posted: **August 11th, 2008, 12:35 pm**

Improvise, I could not find any lexan either, so I used a sheet of 1/8 aluminum I got from an old ceiling tile at work.

Posted: **August 11th, 2008, 1:04 pm**

ya i think for my application 1/4'' should work fine...i was going to go Alu but i figured lexan would be easier to use...

Posted: **August 11th, 2008, 1:34 pm**

I got a big ol' sheet, enough for 2 airboxed from home depot, in the back by all the weird shit (for sale signs, locks, chains, etc.)
It was like $10 and a little under 1/4" (maybe 3/16") in a 2'x1' sheet

Posted: **August 11th, 2008, 9:04 pm**

^^^that's the exact shit i got (same section of HD

)...gonna work fine...was only wondering if for some reason 1/4'' would be too thin...but it'll be good...

Posted: **August 11th, 2008, 9:10 pm**

works perfect! oh, and don't forget to remove both skins

Posted: **August 12th, 2008, 7:26 am**

ok gettin'er done o'er hurrr, but i gotsme a kestion...

did you guys grind out the little airbox bolt nipple things on the boot side? it looks like bob did, i decided to drill holes to make the lexan fit right tight against the box...but after i did that i realized that it would probably be better to grind them off and have a complete sheet covering all the holes...

don'tcha think?

Posted: **August 12th, 2008, 7:33 am**

I chose to use the filter that matched the airboot just so they would mate up perfectly, plus this way all 3 of my bikes use the same filter

Posted: **August 12th, 2008, 7:45 am**

i think i'll still have to use a 450 air filter though...you didn't use stock boots on your builds right?

Posted: **August 12th, 2008, 8:09 am**

na, gen-1 250, or 500 air boots.

Posted: **August 12th, 2008, 8:53 am**

He said NIPPLE!! huh huh huhhuh huh....

Posted: **August 12th, 2008, 10:40 am**

shuddup beavis...

Posted: **December 5th, 2008, 9:58 am**

16,000 + view's......

Posted: **December 5th, 2008, 6:34 pm**

AlisoBob wrote:16,000 + view's......

Yea but 15,000 of those are you looking at them

Posted: **December 5th, 2008, 6:39 pm**

sabreguy wrote:
AlisoBob wrote:16,000 + view's......

Yea but 15,000 of those are you looking at them

BannedCR500Riders.com

AlisoBob's Gen 4 A/F Conversion