1" Square 6061 T-6 Tubing Available

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » April 18th, 2010, 11:43 am

My stuff is made in Canada,

i'll cut it ANY length needed, sell it for 4$us / foot
will ship it usually the same day if i can get it cut in time, and quote options before sending it
I shipped tube every day last week

100hp honda · Post by **100hp honda** » April 18th, 2010, 3:47 pm

bobs hoon "discount" is alittle steep

. $4/ft is good deal considering you ship same day and theres no minimum length

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » April 18th, 2010, 7:09 pm

that, and Bob started this post in 2007!

jarnott71 · Post by **jarnott71** » August 23rd, 2010, 7:54 am

Got mine from roostius_maximus shipped fast no prob comming across to me.

jesusgatos · Post by **jesusgatos** » April 4th, 2011, 10:31 pm

100hp honda wrote:i know where to get it $75 to your door in the western states. 20' made in the usa with certs. use what you need and sell the rest to other hoons at $7.50/ft and put a few bucks in your pocket like bob did . ill sell some of mine eventually, but i want to keep some extra until i get the bends correct incase i fuckup first time around.

I'm in CA (bay area) and need to find some tubing to make a new engine cradle for a 2005 CRF450R that I'm putting an XR250 engine into (build-thread). Have a tubing bender but not a 1" square die-set, so might be interested in having somebody bend tubing for me too. Thanks.

pstoffers · Post by **pstoffers** » April 4th, 2011, 10:37 pm

jesusgatos wrote:
100hp honda wrote:i know where to get it $75 to your door in the western states. 20' made in the usa with certs. use what you need and sell the rest to other hoons at $7.50/ft and put a few bucks in your pocket like bob did . ill sell some of mine eventually, but i want to keep some extra until i get the bends correct incase i fuckup first time around.
I'm in CA (bay area) and need to find some tubing to make a new engine cradle for a 2005 CRF450R that I'm putting an XR250 engine into (build-thread). Have a tubing bender but not a 1" square die-set, so might be interested in having somebody bend tubing for me too. Thanks.

Call me @ 209-480-7900 Paul

jesusgatos · Post by **jesusgatos** » April 8th, 2011, 1:50 am

Thanks, will-do.

pembo_99 · Post by **pembo_99** » June 6th, 2011, 2:25 am

hey, will anybody send to England UK? an engineer friend of mine is after some, its very hard stuff to come by in this country it seems :/

thanks, Andy

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » June 6th, 2011, 6:32 am

pembo_99 · Post by **pembo_99** » June 8th, 2011, 12:59 am

great, ive sent a PM to you. thanks

jesusgatos · Post by **jesusgatos** » July 31st, 2013, 11:50 am

Anybody have any good deals on tubing? Would like to pick-up 8-10ft. In CA (bay area).

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » July 31st, 2013, 11:52 am

I can mail it today if you need

jesusgatos · Post by **jesusgatos** » August 5th, 2013, 4:00 pm

Thanks for the quick reply. Think I've found a source locally. Will know tomorrow.

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » August 5th, 2013, 7:31 pm

broesel33 · Post by **broesel33** » September 11th, 2013, 12:58 pm

Hi,

can somebody tell me why you use 6061?
A friend of me told me I must use 7020 aluminium?

I build a Gen5 frame and need tubes... :-(

Thanks

317 · Post by **317** » July 15th, 2014, 11:56 am

Digging up an old thread...but I'm in need of some of this stuff and wanted to know who has it or where I could get it. I currently have 4 frames in various stages going and I'd like to have a little on hand so I don't get sidelined by not having parts. Your help is greatly appreciated!

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » July 15th, 2014, 12:09 pm

email/picture sent

paddy165 · Post by **paddy165** » August 17th, 2015, 3:19 am

Hey does anyone still sell box section?

Cheers
Pat

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » August 17th, 2015, 8:31 am

I can

paddy165 · Post by **paddy165** » August 19th, 2015, 3:23 am

Have sent you a couple pm's. Get in touch

Cheers
Pat

paddy165 · Post by **paddy165** » August 23rd, 2015, 7:09 pm

Did you get my PM Roostius-Maximus? Send me a reply, I'm keen to get some box on the way.
Cheers
Pat

BannedCR500Riders.com

1" Square 6061 T-6 Tubing Available