Posted: May 29th, 2008, 8:10 am
My 02, Gen 3 is less than 5/8".
Measures .554", or there abouts.
Measures .554", or there abouts.
BannedCR500Riders.com
Addressing the survival of the legendary CR500!
https://www.bannedcr500riders.com/
headstays, engine mounts, etc.
Page 6 of 8
Posted: May 29th, 2008, 8:30 am
Ill be needing some when you get em done
Posted: May 29th, 2008, 10:28 am
The one's that Ported test fit for me measure .542"...which is very close to your .554". Maybe I can send them to you and you can bolt them on.Mad Dog wrote:My 02, Gen 3 is less than 5/8".
Measures .554", or there abouts.
I think Ported's frame is a bit different than other frames. Everything is square and tight, but the dims seem a bit different just the same.
I am leaning towards bumping the offset up to .562" and calling that a good compromise but another test-fit should confirm that. That said: mad Dog, do you want me to send you the one's Ported test-fit so you can take some goof pics?
If you're up for it, shoot me your mailing address in a PM.
Posted: May 30th, 2008, 9:38 am
Yes, PM sent.
Posted: June 9th, 2008, 9:37 am
Please see the product review section for further conversation regarding the covers. Thanks.
Posted: July 31st, 2008, 4:31 pm
PARTS ARE IN!!!!
I have 10 gen. one kits. They include: engine mounts (pair), head stay, coil mount, swingarm spacers (pair) and cooling hose splitter. All CNC machined from billet 6061-T6 Al Aly. Price is $325 (shipped) through PayPal or $310 cash or money order.
I have 10 additional sets of hardware that I will piece out as required. I will have 10 gen. four engine mount sets and 10 gen. 3 headstays (single sided) in about 3-5 days. BTW: tapered engine mounts (gens 1 thru 3) will work fine on a gen four if you can't wait.
For broken out parts, prices (shipped) are as follows:
Engine mounts (all gens) $80/pr
Head stay (Gen. 1 or 3) $55
Coil mount (gen 1) $55
Cooling hose splitter $80
Swingarm pacers $30/pr
MY PayPal addy is: shanimal@live.com
FYI: 10 sets of "Banned" engine covers will be ready in 7-10 days.
<edit> I have bumped the prices to offset the PayPal fees as of 8/4/08
I have 10 gen. one kits. They include: engine mounts (pair), head stay, coil mount, swingarm spacers (pair) and cooling hose splitter. All CNC machined from billet 6061-T6 Al Aly. Price is $325 (shipped) through PayPal or $310 cash or money order.
I have 10 additional sets of hardware that I will piece out as required. I will have 10 gen. four engine mount sets and 10 gen. 3 headstays (single sided) in about 3-5 days. BTW: tapered engine mounts (gens 1 thru 3) will work fine on a gen four if you can't wait.
For broken out parts, prices (shipped) are as follows:
Engine mounts (all gens) $80/pr
Head stay (Gen. 1 or 3) $55
Coil mount (gen 1) $55
Cooling hose splitter $80
Swingarm pacers $30/pr
MY PayPal addy is: shanimal@live.com
FYI: 10 sets of "Banned" engine covers will be ready in 7-10 days.
<edit> I have bumped the prices to offset the PayPal fees as of 8/4/08
Posted: July 31st, 2008, 4:52 pm
The Gen 1 coil mount makes a bitichin Gen 4 CRF250 mount, for sticking the coil under the right number plate....
Posted: July 31st, 2008, 6:13 pm
you would think so...my 450 coil mounts work perfect for the 500 coil...Recycling!
Posted: August 4th, 2008, 7:02 am
Bob, would I need to add a set of additional holes for that to be a drop-in?AlisoBob wrote:The Gen 1 coil mount makes a bitichin Gen 4 CRF250 mount, for sticking the coil under the right number plate....
Posted: August 4th, 2008, 10:52 am
It kinda' just "snaps" in there...
Posted: August 4th, 2008, 1:16 pm
LOL....we'll alrighty then! 
Posted: August 4th, 2008, 1:33 pm
REMINDER: if you are choosing to pay via PayPal, please be sure to include a description of the parts you are ordering. I am getting payments but not being told what I am being paid for. Kind of confusing. Also, if you want to save the PayPal fee, you can pay via Money Order and mail it to me (with instructions):
Shannon Murray
7460 W. Crystal Rd.
Glendale, AZ 85308
Thanks,
Shannon
Shannon Murray
7460 W. Crystal Rd.
Glendale, AZ 85308
Thanks,
Shannon
Posted: August 4th, 2008, 1:38 pm
two puerto rican dancing girls and a shetland pony
Posted: August 4th, 2008, 1:48 pm
I shipped that order this morning. 
Posted: August 7th, 2008, 7:28 pm
Hey all...I fugged up the original kit price. See my revised pricing (READ: LOWERED) in the post on page nine for the correct numbers. Sorry...and thanks!
Posted: August 21st, 2008, 6:47 pm
hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here! 
Posted: September 1st, 2008, 3:34 pm
ALL: my prices are good for continental US destinations only. If you are in Europe, Canada or Australia, YOU WILL be paying more for shipping. Sorry.
Posted: September 2nd, 2008, 9:41 am
I asked for a pony not a goat!ShanMan wrote:hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here!
Posted: September 2nd, 2008, 6:49 pm
teemtrubble wrote:I asked for a pony not a goat!ShanMan wrote:hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here!
Posted: September 26th, 2008, 7:56 am
I know you guys have seen them before but these are too nice not to show off,got them yesterday
Thanks again Shanman
Thanks again Shanman
Posted: September 26th, 2008, 9:16 am
SHWING!kkvslayer wrote:I know you guys have seen them before but these are too nice not to show off,got them yesterday
Thanks again Shanman
af that much better
Posted: October 13th, 2008, 5:56 pm
is the af realy that much better i just finished the restoration on my 93 do i need to do it over as anf
Posted: October 14th, 2008, 10:42 am
What series aluminum are you using for these?
Posted: October 14th, 2008, 3:21 pm
6061-T6 al aly
Posted: October 14th, 2008, 4:01 pm
sorry i am taking so long, but i'm deffinately going to send the cash either tomorrow or thurs by the latest...i can't wait to use those mounts they look awesome...