1" Square 6061 T-6 Tubing Available

Post by **AlisoBob** » October 12th, 2007, 11:05 am

This matches the original tubing very well, incorporates the OEM .125" radius on the exterior.

This is the stuff you need for your A/F conversions!

Aerospace quality...Sold by the foot, $7.50 per

PM me with orders.... paypal accepted.

TJC510 · Post by **TJC510** » November 6th, 2007, 3:08 pm

how thick is this? how much do you have?
im thinking about getting a square die for my bender and making a whole new cradle.

Post by **AlisoBob** » November 6th, 2007, 3:30 pm

.125 wall and I have 20' of it

Post by **AlisoBob** » March 26th, 2008, 5:11 pm

I'm getting down to last few feet. A guy in Norway wants to buy all I have.

Order it now, cuz when its gone..its gone.

( Graves and Jay, I have you covered)

teemtrubble · Post by **teemtrubble** » March 26th, 2008, 5:26 pm

I got plenty Bob let me know if you guy's need more.

Post by **AlisoBob** » June 17th, 2008, 9:39 am

I am out......

perrymx52 · Post by **perrymx52** » February 25th, 2009, 4:23 pm

Can 1" square stock be used??? Have access to about 6' of it. My conversion is going to be an 08 crf250. Was wondering if it could be used instead of the square tubing??? Friend of my will give me the square stock. From Bob's build it looks like he only used about 5-7 inches per side?? Thanks in advance.

matt_NC · Post by **matt_NC** » December 21st, 2009, 1:50 pm

Anybody have tubing to sell?

I need two pieces long enough to do a Gen 4.

redride · Post by **redride** » January 10th, 2010, 12:11 pm

IF you have any more tubing I could use some as well as I just picked up a 4th generation roller as well

jayj500 · Post by **jayj500** » February 24th, 2010, 9:04 am

I could also use some tubing for a upcoming AF conversion.

Thanks

Exnav · Post by **Exnav** » February 24th, 2010, 12:49 pm

jayj500 wrote:I could also use some tubing for a upcoming AF conversion.

Thanks

You guys should contact Roostius.

http://www.youtube.com/user/500bigbore · February 24th, 2010, 12:58 pm

Thanks for the kick!

i'll take paypal, email me or PM, likely i can ship it the same day

my username @live.com

100hp honda · Post by **100hp honda** » March 23rd, 2010, 5:17 pm

how can you tell if its aerospace qaulity tube ?

"SOLID Bro!!" · Post by **"SOLID Bro!!"** » March 23rd, 2010, 8:41 pm

If you buy it from a metal house they should be able to provide a certification sheet for it.

100hp honda · Post by **100hp honda** » March 24th, 2010, 4:07 pm

thnx for the help. talked to the heat treater today and he mentioned same thing about getting a certification with it.

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » March 24th, 2010, 6:45 pm

my stuff used to have the grade and everything printed on it, then to cheappen it they dropped the print, now its only on the pallet of the tube instead of each individual piece

100hp honda · Post by **100hp honda** » March 25th, 2010, 3:43 pm

that sucks they dont mark every individual piece up there. it could be a huge problem if some ass hat got your order mixed up and sent you the wrong stuff. would suck even worse if you got it welded into the frame and then found out it was wrong.

100hp honda · Post by **100hp honda** » March 26th, 2010, 1:32 pm

i got a bunch of gen3 tube on its way 1"x1" x .125 (1/8 thick) x .125 ( 1/8 outside radius) x .062 (1/16 inside radius). the whole lot will be annealed to 0. assuming the fab shop doesnt fuck up any bends then i should have a bunch left over. it wont work for you however unless your doing a heat treat method. its still about 3 weeks out untill i have the finished product in my hands but ill keep you guys posted in case i have some extra incase a hoon needs some.

HoosierDaddy · Post by **HoosierDaddy** » March 29th, 2010, 8:43 pm

So who has the tubing out there now?

100hp honda · Post by **100hp honda** » April 3rd, 2010, 1:21 am

theres alot of online metals places. google online metals and you should find 15 places.

dubious01 · Post by **dubious01** » April 17th, 2010, 9:02 pm

anybody got any of this left?

I need a couple feet.

100hp honda · Post by **100hp honda** » April 17th, 2010, 10:10 pm

i know where you can get some but if theres any type of import taxes it might not be worth it. is there no places in cananda that sells it ?

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » April 18th, 2010, 8:14 am

right here, and i send ALOT south too

Post by **AlisoBob** » April 18th, 2010, 10:43 am

Roostius_Maximus wrote:right here, and i send ALOT

But you gotta' deal with this....

100hp honda · Post by **100hp honda** » April 18th, 2010, 11:04 am

i know where to get it $75 to your door in the western states. 20' made in the usa with certs. use what you need and sell the rest to other hoons at $7.50/ft and put a few bucks in your pocket like bob did

. ill sell some of mine eventually, but i want to keep some extra until i get the bends correct incase i fuckup first time around.

BannedCR500Riders.com

1" Square 6061 T-6 Tubing Available

1" Square 6061 T-6 Tubing Available