Franks 06 CRF250 Conversion
Franks 06 CRF250 Conversion
Picked this up today. Now to sell my '94 125 and Street legal '90 500 to fund to project.
Last edited by homenf on November 16th, 2009, 10:01 pm, edited 1 time in total.
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
I pulled it out. It looks good but it did come from a bike that didn't run for awhile. It does have the QS2 on it so that should help. I just want a fair price while giving a fair price also. Ebay seems to have this stuff priced pretty high so I'm not sure what is fair.
I'll post some pics of the carb soon.
I'll post some pics of the carb soon.
Got the thing all cut up and the Y cleaned out.
Also have decided to use my plated 500 for the donor. Got the donor jetted correctly a few days ago and holy crap! downright scary on the street. The engine is a 90 so the rear will have to be drilled out. Can this be done with a hand drill or should it go to the machine shop?
Using the jig and taking the frame to the welder tomorrow.
Got it apart pretty quick after I actually started. Portable bandsaw worked perfect.
Also have decided to use my plated 500 for the donor. Got the donor jetted correctly a few days ago and holy crap! downright scary on the street. The engine is a 90 so the rear will have to be drilled out. Can this be done with a hand drill or should it go to the machine shop?
Using the jig and taking the frame to the welder tomorrow.
Got it apart pretty quick after I actually started. Portable bandsaw worked perfect.
94 CR125
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
89-01 CR500 bikes use the 17mm diameter swingarm pivot bolt the same diameter as all the alloy framed bikes there is no need to drill anything out to make it fit. ( motor bushings that is )
Jack Schitt
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
Cheers for that Jack, you're the man with the answers ! Your tip about where to go for stator stuff was good too. Betta Bikes seem very helpful. gotta spend 8 hunj on a new CRE500 kit, then send it to them to modify . . . . money pit . . pit . . . it. . . it. . . t. That's some echo, must be a big pit ! sigh
I have found everything that I like in life is either illegal or bloody EXPENSIVE!
As for the answers, they are all in the forum and would be found if you can wait that long to look for them.
All I do is take the shortcut for you.
If you spent as much time as me reading this forum and researching CR500s and AF bikes you would also have the answers. ( I don't have all of them though )
Jack Schitt
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
DIE FIRST, worry about it later!
DON'T talk about it, Just DO IT!
When in doubt, GO FLAT OUT!
2001 CR500R1 - SOLD
2007 CR250R7 - SOLD
Wife and Daughter - Left Aug 17 - 2010
Jack Schitt - ??????????????
Took frame to welder again. This time with the metal since he couldn't supply the little material I needed.
He said it will be a few weeks. Good sign if he is busy right now. We'll see how it turns out.
He said it will be a few weeks. Good sign if he is busy right now. We'll see how it turns out.
Last edited by homenf on March 10th, 2010, 6:51 am, edited 4 times in total.
94 CR125
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
copy paste works greatCR500R7 wrote:The link NO WORKIE dude.
http://www.facebook.com/photo.php?pid=3 ... 1251137729
Had to remove the new front mounts. Ordered and had put on the new front mounts from:
East Valley Precision LLC
Robert C. Lyons
5248 S. Delaware Dr. Bldg B.
Apache Junction , Arizona 85220
Phone: 480-288-6601
I'm happy with them and my welder was impressed with them.
I was about to put the engine back together when I grabbed the rod and it seemed to have quite a bit of play in it. I'm going to do the bottom end now also.
East Valley Precision LLC
Robert C. Lyons
5248 S. Delaware Dr. Bldg B.
Apache Junction , Arizona 85220
Phone: 480-288-6601
I'm happy with them and my welder was impressed with them.
I was about to put the engine back together when I grabbed the rod and it seemed to have quite a bit of play in it. I'm going to do the bottom end now also.
94 CR125
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
broke my work stand. Got very lucky and it fell on something else instaed of the concrete floor.
My main list to complete:
Airbox (going to try a loudmouth kit)
radiators (buying new higher capacity units. the old ones were half smashed)
Form fuel tank
Get or make headstay (hope I can just order one)
Coil mount (still researching)
94 CR125
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."
06 CR500AF
"I'd give you my two cents on this hope and change thing, but I can't afford to anymore."