Dumont Oct 5th-7th...

[M.F.D.B.]

oh man say it aint so. a girl on a STOCK banshee? BRIT thats worse than getting hammered by flatbillers

Watch the vids, danny and mfdb are trippin

I noticed MFDB din't mention the 4 stroke quad owning him at banshee hill huh, its amazing how selective memory works

I decided last week I either need to loose weight or make the bike faster, NOS won lol

If that quad owned me and you never won a race against me, whats that say about you?? HAHAHA

BTW that quad had everything done to it you can do besides N2O and the fact that he has 5 or 6 times the traction means none of us stand a chance on a bike. Remember what those quads did to Jays bikes?? They have friggin N2O and stretched out with $2,000 paddles!! I have come to realize no matter how bad a bike is made, traction is traction, you gotta put the power to the ground or its worthless. So in a drag race quads are the way to go, but see if ANY of those bad ass quads wants to race me over whoops, triples, or rock crawling and we all know what the answer to that is...

[M.F.D.B.]

yeah, the vids didn't do it justice, VERY steep.

Couldnt be THAT steep, I did wheelie ACROSS it!!

[Ported&Polished]

That looked fun, I just don't understand why drag racing is so big a deal. To me it's a couple hill runs, then off to the bowls. And as for traction, what paddles are you folks using? I think alot of light is gonna be shed at Glamis about how a fast a properly set up cr500 can be. I can tell you right now, you guys are gonna shocked by what goes on out there.

[britincali]

That looked fun, I just don't understand why drag racing is so big a deal. To me it's a couple hill runs, then off to the bowls. And as for traction, what paddles are you folks using? I think alot of light is gonna be shed at Glamis about how a fast a properly set up cr500 can be. I can tell you right now, you guys are gonna shocked by what goes on out there.

That was only 10 mins of what we did there, we hit comp a few times and banshee for 20 mins or so and that was it for dragging. We did some decent bowl cruising and on sat me and danny did a little haul ass run that was pretty fun

Oh and I ran a 10 blade IMS sandsnake, MFDB had the same on his 500, danny and MFDBs 450 had an 8 blade.

[M.F.D.B.]

on sat me and danny did a little haul ass run that was pretty fun

So that means you guys got out of 3rd gear??

[britincali]

on sat me and danny did a little haul ass run that was pretty fun

So that means you guys got out of 3rd gear??

At least I wasnt going out of my way trying not to rear end you

[M.F.D.B.]

on sat me and danny did a little haul ass run that was pretty fun

So that means you guys got out of 3rd gear??

At least I wasnt going out of my way trying not to rear end you

I appreciate that!!

[lewisclan]

That looked fun, I just don't understand why drag racing is so big a deal. To me it's a couple hill runs, then off to the bowls. And as for traction, what paddles are you folks using? I think alot of light is gonna be shed at Glamis about how a fast a properly set up cr500 can be. I can tell you right now, you guys are gonna shocked by what goes on out there.

Yeah me to as far as the drags go.. I want to see the light

[dannygraves]

oh man say it aint so. a girl on a STOCK banshee? BRIT thats worse than getting hammered by flatbillers

Watch the vids, danny and mfdb are trippin

I noticed MFDB din't mention the 4 stroke quad owning him at banshee hill huh, its amazing how selective memory works

I decided last week I either need to loose weight or make the bike faster, NOS won lol

you do know I'm just messing with you, right, if you watch the vid she launched way before you and you were passing her as she turned, she didn't REALLY beat you. Its just fun to mess with you cuz you get all fired up.

I actually took that 4 stroke quad once because as he was launching, I was approaching the launch area already rolling, and since there weren't any launch probs, I took him, but barely. The second time I raced him was when I seized the bike (I was trying a little too hard)
HAHAHA

Brit, its too bad you got a case of mangina when you saw the ranger and decided to stay at camp and drink cuz Justin and I went on a sweet bowl ride!
It would be nice if we had a larger turn out next time though!

[dannygraves]

on sat me and danny did a little haul ass run that was pretty fun

So that means you guys got out of 3rd gear??

yeah, I was amazed, after Brit has a few beers he hauls ass!! I was all tired and full from lunch and didn't really feel like hauling ass, so I was loosly following just so I could make sure we didn't lose track of each other. It was a cool ride though, we just kinda winged it and kept trading places on who was in front, just messing around really.

[britincali]

Brit, its too bad you got a case of mangina when you saw the ranger and decided to stay at camp and drink cuz Justin and I went on a sweet bowl ride!
It would be nice if we had a larger turn out next time though!

I know your just talking shit man thats what this place is all about


The glamis trip will be the 3 year anniversary of my DUI and I dont EVER want another, I dont trust cops/rangers in the slightest anymore and to me it wasnt worth the risk of another night in clink and loosing my licence and job.

On a positive note im gonna be off probation for the first time in 6 years on oct 20th!!!!!!!!

[dannygraves]

On a positive note im gonna be off probation for the first time in 6 years on oct 20th!!!!!!!!

[lewisclan]

we will be proud of you then .......unless you get nambed at Glamis

[lewisclan]

when do you guys want to plan a Dumont trip I am ready for some dune riding.

[dannygraves]

I'm getting a wonderful grinding noise out of my motor which I am suspecting is sand grinding with my main bearings!!! so it might be a little while for me!

[M.F.D.B.]

when do you guys want to plan a Dumont trip I am ready for some dune riding.

uhhh, we just got back!! HAHA

We always get season passes, we go all the time. I think the next planned trip is weekend before All Hallows Eve...

Im going to be taking my 500 apart in the next few days/weeks to replace the K&S gaskets and seals with OEM.

[lewisclan]

I have beed doing alot of work durning the weekends this one comming up I hope to be my last one for a while if the bikes all running good at glamis I would like to keep em in the sand for a few weeks back to back weekends are real expensive for me. I really like dumont but Glamis is only a few hours away for me . Just keep me abrest of your dumont trips

[M.F.D.B.]

I have beed doing alot of work durning the weekends this one comming up I hope to be my last one for a while if the bikes all running good at glamis I would like to keep em in the sand for a few weeks back to back weekends are real expensive for me. I really like dumont but Glamis is only a few hours away for me . Just keep me abrest of your dumont trips

Need me to pull your trailer huh?? HAHA

[100hp honda]

I'm getting a wonderful grinding noise out of my motor which I am suspecting is sand grinding with my main bearings!!! so it might be a little while for me!

ol sand man got ya eh . thought you was a veteran sand rider? i learned my lesson years ago, sand can and will find its way just about anywhere. it has no problem going through any filter without extra protection. seen it go through foam and K&N filter without filter skins

[M.F.D.B.]

I'm getting a wonderful grinding noise out of my motor which I am suspecting is sand grinding with my main bearings!!! so it might be a little while for me!

ol sand man got ya eh . thought you was a veteran sand rider? i learned my lesson years ago, sand can and will find its way just about anywhere. it has no problem going through any filter without extra protection. seen it go through foam and K&N filter without filter skins

Ill bet money its not sand. I have never had sand get past a properly CLEANED and maintained filter. I think Dannys is hearing the aluminum that anodized the cylinder now moved to the mains...

[100hp honda]

i didnt meen to come across to make fun of dannys misfortune. hope its not as bad as it sounds. i seen a few grains of sand in my intake last time. i didnt hear it grinding but i know how it feels

[dannygraves]

LOL, its cool dude. I got a year and a half of abuse out of that motor! I'm gonna crack it open tonight, or this weekend, and take some pics of what I find.

[britincali]

I'm getting a wonderful grinding noise out of my motor which I am suspecting is sand grinding with my main bearings!!! so it might be a little while for me!

ol sand man got ya eh . thought you was a veteran sand rider? i learned my lesson years ago, sand can and will find its way just about anywhere. it has no problem going through any filter without extra protection. seen it go through foam and K&N filter without filter skins

Ill bet money its not sand. I have never had sand get past a properly CLEANED and maintained filter. I think Dannys is hearing the aluminum that anodized the cylinder now moved to the mains...