1999 CR125 Ready to be hacked

[dannygraves]

ya, I had to wack pretty hard on my '86 to get them out.

[kkvslayer]

Will the stock 125 y peice for the collant line flow enough to keep the 500 cool,I got the 2 hoses to slide on the spigots just wondering if it will resrict flow

[CR500PHIL]

Will the stock 125 y peice for the collant line flow enough to keep the 500 cool,I got the 2 hoses to slide on the spigots just wondering if it will resrict flow

I got a 2 5/8 to 1 3/4 Y from an 80's YZ 250 to do my coolant piping. I used this just outside the frame on the left side and then used two brass 90 degree 5/8 elbows outside the frame and then two on the head. It makes for a lot of pipe clamps but it is simple and keeps the engine cool. Of course here in Canada we do not have the same cooling needs as in the south.

[dannygraves]

there is a plastic Y that works well that was stock on a '02-'04 crf450. when I did the gen-4s thats what I used, local honda dealer had it in stock.

[kkvslayer]

I found a good Y at the housing shop here,My bike has been ready to ride for a couple weeks now but I'm still waiting on a front sprocket,Hopefully tomorrow,I'm itchin to ride,Tired of the sled and quad