stock cr 500 cylinder
stock cr 500 cylinder
hello! is there any body on here that has bought a new stock cylinder that has not been straight? like a taper thats tighter in the bottom? like you couldn't get the piston tru it from the bottom side? any feedback would be great.
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
my cylinders pretty much always come off like that after using them for a while, not sure what that means
even the ones that are double checked to be perfect going in ?
Id rather they stayed straight, but dosent seem to hurt anything so far
even the ones that are double checked to be perfect going in ?
Id rather they stayed straight, but dosent seem to hurt anything so far
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
4stroke=dead fish
4stroke=dead fish
cr 500 cyl
mine was a hair looser by the transfers and more or less the same top and bottom.