My Custom Headstay
-
- Posts: 52
- Joined: April 27th, 2013, 12:53 am
- Location: QLD, Australia
My Custom Headstay
This is my first design of my Gen3 Aluminium Headstay, It took me all day cause I have never used an CAD drawing program. I think i did alright. All the plates will be waterjet cut out.
What are your throughts of it? [/img]
[/img]
I am still designing the CDI and Coil mounts which will sit in the middle of the box section.
What are your throughts of it? [/img]
[/img]
I am still designing the CDI and Coil mounts which will sit in the middle of the box section.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
look around, make the thing brace to the shock tower area of the frame. 1/3 the weight/material and results in the same hold as every other honda two stroke. its simple and it works. Likely even use the side arms from the 4 stroke motor mounts if you wanted.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Re: My Custom Headstay
Gen 3 bikes dont need exotic headstays.....lambofgod85 wrote: This is my first design of my Gen3 Aluminium Headstay,
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
i'd do something like this, done it before and its been great. I'm planning the same thing in my gen5
not my picture...
not my picture...
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
thats the only way to do it the cross brace style is junk you will never stop it vibrating and never keep your engine mounts tightRoostius_Maximus wrote:i'd do something like this, done it before and its been great. I'm planning the same thing in my gen5
not my picture...
only posties ride 4 stroke hondas
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
goldfields sheet metal fabrication
98 yzfr1
05 crf 500 race tech goldies
2010 rmz 500af
01 banshee
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
- Gravel Scratcher
- Posts: 278
- Joined: September 20th, 2009, 8:45 pm
- Location: Australia, Central QLD
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Thanks Paul, i have something similar, I mounted the coil bolts 90* to the ones pictured so that the mount can be flipped over and its 5mm offset can hide the coil up higher if required. I've done them for cr5 and cr25 coils
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
gen 5 has a mountain of room under the tank, thats what Paul has pictured here and what I did the mount for.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Or you could have it put on the other side,
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
-
- Posts: 110
- Joined: January 8th, 2010, 11:35 pm
- Location: Berry Creek, Ca.
Hillbilly500 wrote:Here is the one I did on my 02 cr250 swap
[URL=http://s259.photobucket.com/user/pat4x4 ... 0.jpg.html]
headstay
That part looks identical to the one's i have made