1995 Steelie rebuild
1995 Steelie rebuild
So, here are some pics of my 1995 CR500 rebuild:
http://imageshack.us/g/684/2012031900366002klein.jpg/
There are some scratches on the piston at the intake side, i think those were coming from the piston / cylinder clearance of only 0,05mm (0,002")!?
Anybody knows something about this fork? Kayaba or Showa?
The fork bleeder thread is 4mm, but KYB and SHOWA should be 5mm?!
Nothing to say about this "motor mounting bolt"....
Yesterday i've sent the cylinder to the netherlands for reboring and relieving the exhaust bridge, hope this guy knows what he is doing....
Which chain should i choose? O-Ring or a standard chain?
Hope i'll get it done in the next few weeks
*edit*
pics are working now
http://imageshack.us/g/684/2012031900366002klein.jpg/
There are some scratches on the piston at the intake side, i think those were coming from the piston / cylinder clearance of only 0,05mm (0,002")!?
Anybody knows something about this fork? Kayaba or Showa?
The fork bleeder thread is 4mm, but KYB and SHOWA should be 5mm?!
Nothing to say about this "motor mounting bolt"....
Yesterday i've sent the cylinder to the netherlands for reboring and relieving the exhaust bridge, hope this guy knows what he is doing....
Which chain should i choose? O-Ring or a standard chain?
Hope i'll get it done in the next few weeks
*edit*
pics are working now
Ordered several spare parts today
+Chain & sprockets
+Rear brake disc & pads
+New headstays and bolts to fix the "Nig-guyver" like repair of the
previous owner
+Some other small parts like bearings and seals
Hoping to get the frame sandblastet this weekend, so that i can reassamble the bike next weekend....
+Chain & sprockets
+Rear brake disc & pads
+New headstays and bolts to fix the "Nig-guyver" like repair of the
previous owner
+Some other small parts like bearings and seals
Hoping to get the frame sandblastet this weekend, so that i can reassamble the bike next weekend....
if you aint mixin' gas, you aint kickin' ass...
CR500 1995
GSX-R1000 K5 Yoshimura
CR500 1995
GSX-R1000 K5 Yoshimura
on the intake side of the piston it looked like a little seizureAlisoBob wrote:That piston looks great, why did you want to bore the cylinder?
dont know why I didnt take a picture of it...
it looked much like this one (random pic out of google):
if you aint mixin' gas, you aint kickin' ass...
CR500 1995
GSX-R1000 K5 Yoshimura
CR500 1995
GSX-R1000 K5 Yoshimura
-
- Posts: 3
- Joined: November 2nd, 2009, 8:13 pm
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
who doesnt have a railroad anvil
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd