GTS Fabworks
GTS Fabworks
Just got off the phone with Eric. He had surgery and everything went well. The doctor says he will be in the hospital for @ a week. After that he can return home and be out for about another week. I am wishing him well and for him to get back to building.
X 491sabreguy wrote:Heal well Eric!
91 CR 500, Ca. plated.
09 CRF 450X
XR 650L
2000 CR 250R
2006 CRF 150F
http://www.hammonconstruction.org/
09 CRF 450X
XR 650L
2000 CR 250R
2006 CRF 150F
http://www.hammonconstruction.org/
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
Yea he's back at it he is doing my crf450 conversion he got back on it after he got out of the hospital , he started back on it monday and I talked to him Tuesday said he was gonna kick it out and ship it to me fri no later than tomorrow (Monday) but I can't get ahold of him tried calling and email button response for 5 days !! Is he ok? Not sure if he's back in the hospital !!!! I hope he's ok can't have worlds best down huhcmotodad wrote:JUst got word that Solid has broken the joint. He is back home and on the mends. Let's wish nim a speedy recovery and I am sure he is happy to get some home cooked food.
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
AlisoBob wrote:Yea Brit.... I'm making all this shit up... and this is nothing at all like how all the Fachar shit started.cr500beercan wrote:...I can't get ahold of him tried calling and email button response for 5 days !! Is he ok?
Casper, tell him to answer his flippin' phone.
I haven't ever had any trouble getting ahold of him , this is all new he's been great about responding , I have bugged the hell out of him though , may have pissed him off , but Im thinking he might be back in the hospital or something else , hope he is ok !!!!!!
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
Well I'm not bashing him by far!!!!!! Im just curious if anyone has heard through the grape vine if he's ok , and if there's another way to contact him other than his business phone , if anyone knows of a way to contact him other than his business phone email me at cr500isking@hotmail.comjosh wrote:the squeaky wheel gets the grease. he has to give up reasons why when money is involved... to keep customers happy. keep on him until you get the response.
Hold On Just a Minute
I talked to Eric last week. He tried to go back in the shop but was weaker than he thought. I also think he knew going in it was a long haul and Eric told him about it. Not sure if any time frame was worked out but he knew going in it was going to take awhile. I think he also knew that the 500 frames were not the only work Eric does. Maybe a good idea for everyone to calm down about the GTS site business as it has to do with getting things lined up for paperwork. He will be back going strong soon and we will all be happy again. At least most of us will. Bob
I talked to Eric last week. He tried to go back in the shop but was weaker than he thought. I also think he knew going in it was a long haul and Eric told him about it. Not sure if any time frame was worked out but he knew going in it was going to take awhile. I think he also knew that the 500 frames were not the only work Eric does. Maybe a good idea for everyone to calm down about the GTS site business as it has to do with getting things lined up for paperwork. He will be back going strong soon and we will all be happy again. At least most of us will. Bob
Last edited by cmotodad on April 14th, 2012, 8:46 pm, edited 1 time in total.
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
Well please don't try to make me look stupid here ,and I am completely aware of what we talked about not my fault it was blown out of context I didnt get on here to have a pissing contest , I was concerned that some thing was wrong and I couldn't get ahold of him for almost a week , I knew he was slow go and it was going to be a big job to do and yea he does great conversions on the SIDE i know he has another job.Besides this is something for Eric and I to squash I have no problems with Eric and as far as time frame im not even going to get into that , I just wish me and Eric could talk this out , I know that through these silly posts and he said she said stuff he will still be mad at me , I just wish HE and I could chat this out , that way there's not all this hitting a website trying to kill himcmotodad wrote:Hold On Just a Minute
I talked to Eric last week. He tried to go back in the shop but was weaker than he thought. I also think he knew going in it was a long haul and Eric told him about it. Not sure if any time frame was worked out but he knew going in it was going to take awhile. I think he also knew that the 500 frames were not the only work Eric does. Maybe a good idea for everyone to calm down about the GTS site business as it has to do with getting things lined up for paperwork. He will be back going strong soon and we will all be happy agian. At least most of us will. Bob
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
cr500beercan wrote:Well please don't try to make me look stupid here ,and I am completely aware of what we talked about not my fault it was blown out of context I didnt get on here to have a pissing contest , I was concerned that some thing was wrong and I couldn't get ahold of him for almost a week , I knew he was slow go and it was going to be a big job to do and yea he does great conversions on the SIDE i know he has another job.Besides this is something for Eric and I to squash I have no problems with Eric and as far as time frame im not even going to get into that , I just wish me and Eric could talk this out , I know that through these silly posts and he said she said stuff he will still be mad at me , I just wish HE and I could chat this out , that way there's not all this hitting a website trying to kill himcmotodad wrote:Hold On Just a Minute
I talked to Eric last week. He tried to go back in the shop but was weaker than he thought. I also think he knew going in it was a long haul and Eric told him about it. Not sure if any time frame was worked out but he knew going in it was going to take awhile. I think he also knew that the 500 frames were not the only work Eric does. Maybe a good idea for everyone to calm down about the GTS site business as it has to do with getting things lined up for paperwork. He will be back going strong soon and we will all be happy agian. At least most of us will. Bob
Just to seal this up ,there is no problems between Eric and me this was all blowed out of proportion , all cause I was trying to make sure my bike builder was ok , come to find out there were legitimate reasons for what was goin on , all and all Eric at Gts Fabworks is the best bike builder out there and everybody that has seen his work knows that and and some people feels threatens by that so will take anything they can and try to discredit him to knock him out of the bike building game over silly stuff, he has and will always have my business , and deserves recognition for what he does , I trust any decision he makes on my build as being the best and nicest way of doing it no questions asked !!!! You know I should start my own cr500 website so people don't get banned for being politically correct . Ban someone and now he can't defend himself so now we can bash him , total BS
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
And who the hell asked you tharrell !!!!! I don't even know you go to a forum that concerns you , unless your concerned about Gts Fabworks and people's friendships and business relations , you didn't have to post here to get King Bobs approval , just ask him if you can ..... Go ahead ... Ask him if you can suck his ........ No offense bud but in my experience when some one steps in on a conversation he knows nothing about to spirt shit out its to impress someone only one here to impress is Aliso , so just ask him no need to make yourself look stupid by jumping in this conversation . LMAO Now that's comedy hahahaTharrell wrote:You ARE, if nothing else a true hoon!AlisoBob wrote:
I'm sitting here trying to follow these posts and I get to the bottom and just have to laff my ass off at that response.
Nothing personal to anybody, call it comic relief if you will.
Calm down man.cr500beercan wrote:And who the hell asked you tharrell !!!!! I don't even know you go to a forum that concerns you , unless your concerned about Gts Fabworks and people's friendships and business relations , you didn't have to post here to get King Bobs approval , just ask him if you can ..... Go ahead ... Ask him if you can suck his ........ No offense bud but in my experience when some one steps in on a conversation he knows nothing about to spirt shit out its to impress someone only one here to impress is Aliso , so just ask him no need to make yourself look stupid by jumping in this conversation . LMAO Now that's comedy hahahaTharrell wrote:You ARE, if nothing else a true hoon!AlisoBob wrote:
I'm sitting here trying to follow these posts and I get to the bottom and just have to laff my ass off at that response.
Nothing personal to anybody, call it comic relief if you will.
I didn't mean to piss you or anyone else off.
I guess you don't have my perspective is all.
I'm sitting here and my computer is fucked, at least most of it is.
I'm waiting for the dicks at Norton to get back to me need my computer for banking etc... Not just for porn or this site.
I am able to use IE to get on the web but it's limited.
So, here I am all serious and this thread is serious and then the popcorn guy pops up.
I spit my coffee out like I was watching a 3 stooges episode.
Really, I didn't mean to piss you off.
I don't know Solid just conversed on here with him.
Don't know what kind of med problem he's having but, I wish him the best.
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
What's the scale aliso, I ain't smart enough to start my own website anyway ha no worries lol I ain't pissed , but I think friendship with long friends is irreplaceable not something you can just write off over disagreements , miscommunication , and or money , I don't know everything about it though, but I don't know that's just me , you know bitches come and bitches go but friends last forever bud .... Ahhhh that's cute huh lolAlisoBob wrote:cr500beercan wrote:You know I should start my own cr500 website....
Explain that to Eric if you ever get him on the phone. Appearantly my wife hurt his feelings....cr500beercan wrote:I think friendship with long friends is irreplaceable not something you can just write off over disagreements , miscommunication...
The graph is every time someone got butt hurt vs. how many other websites are going to get started....
-
cr500beercan
- Posts: 52
- Joined: March 21st, 2012, 1:56 pm
Ohh i understand the graph ha nice ,If your innocent of anything to do with the issue , why did you ban him ?AlisoBob wrote:Explain that to Eric if you ever get him on the phone. Appearantly my wife hurt his feelings....cr500beercan wrote:I think friendship with long friends is irreplaceable not something you can just write off over disagreements , miscommunication...
The graph is every time someone got butt hurt vs. how many other websites are going to get started....
Its got nothing to do with his problem with my wife....cr500beercan wrote: Ohh i understand the graph ha nice ,If your innocent of anything to do with the issue , why did you ban him ?
AlisoBob wrote:Translation:cr500beercan wrote:I just wish HE and I could chat this out
Your wishing that while he sits on his couch, watching old reruns of "Paranormal Cops"... he could take 5 minutes to pick up the phone and call you.
That seems pretty do-able from where I sit.... but I guess not.