Good Purchase? Paper Weight? Speak Up!!!
icediver
Posts: 45 Joined: November 14th, 2007, 3:10 am
Location: Maine
Post
by icediver » November 27th, 2007, 4:42 pm
Just a FYI. I ordered a couple main and a couple pilot jets from Magicracing.com and just received them. They are not factory Keihin jets, even though their website shows a picture of factory Keihin jets.
I have emailed them and are awaiting a response.
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm
Location: Barstow, CA
Post
by britincali » November 27th, 2007, 4:46 pm
Well that sux
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Ported&Polished
Posts: 1898 Joined: June 23rd, 2007, 12:47 pm
Location: Prescott
Post
by Ported&Polished » November 27th, 2007, 5:04 pm
One of the ones pictured is a factory Kehin jet, I see the lazy star.
Don't Clyde it, ride it!
icediver
Posts: 45 Joined: November 14th, 2007, 3:10 am
Location: Maine
Post
by icediver » November 27th, 2007, 5:09 pm
Ported&Polished wrote: One of the ones pictured is a factory Kehin jet, I see the lazy star.
Thats why I ordered them.
I would support my local shop, but the closest place is 120 mile round trip.
ISBB
Posts: 1547 Joined: October 25th, 2007, 7:16 pm
Location: Sin City
Contact:
Post
by ISBB » November 27th, 2007, 6:01 pm
sudco.com is where i picked up all my jets... i think i paid 30 bucks for everything from 170 - 200 and a few pilots and a needle
97 Steel 500 that wants to be an AFC
dannygraves
Posts: 8020 Joined: June 1st, 2007, 2:03 pm
Location: Las Vegas, NV
Post
by dannygraves » November 27th, 2007, 6:24 pm
x2 on sudco.com
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » November 27th, 2007, 6:56 pm
send them back....
icediver
Posts: 45 Joined: November 14th, 2007, 3:10 am
Location: Maine
Post
by icediver » November 27th, 2007, 8:17 pm
AlisoBob wrote: send them back....
Thats the plan. I'll see what their response is.
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » November 27th, 2007, 9:19 pm
For those that dont know.. The Real Keihin jets are drilled, flowed, and then stamped the correct number.
Cheapie ones are just drilled and stamped. They are very inaccurate.
You may install a "Larger" one, and lean it out instead..
britincali
Posts: 8207 Joined: May 31st, 2007, 7:10 pm
Location: Barstow, CA
Post
by britincali » November 27th, 2007, 9:38 pm
AlisoBob wrote:
Cheapie ones are just drilled and stamped. They are very inaccurate.
..
I had a 172 main in my 87 that blubbered on top for the hell of it I slapped in a 172 genuine kehin jet and it ran a ton leaner.
I threw away all of my non-stamped jets that day, its the one place im definatly not looking for a bargain.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Hellbear
Posts: 2255 Joined: June 13th, 2007, 8:14 pm
Location: Richmond Hill, GA
Post
by Hellbear » November 28th, 2007, 9:36 am
My bro-inlaw Steiner-311 and I may have a connect at Sudco. Let me get a hold of the guy and see what he can do.
icediver
Posts: 45 Joined: November 14th, 2007, 3:10 am
Location: Maine
Post
by icediver » November 28th, 2007, 1:50 pm
I'm just waiting to hear back from Magicracing now to see if they will fully refund my purchase including shipping. Then I'll order some real ones through Sudco. I would have purchased them there initially, but there online odering is only via email or phone.
ou812
Posts: 794 Joined: June 22nd, 2007, 12:41 pm
Post
by ou812 » November 28th, 2007, 6:29 pm
Dennis Kirk sells them one at a time, sudco sells the 4 at a time.
By the way mains do wear out over time just like rod