Wanted: 90-01 frame head tube

louis mielke · Post by **louis mielke** » October 28th, 2011, 1:12 pm

I need a head tube from a 90-01 frame for a project.

Anyone have a bad frame who wants to lop off the head tube and sell or give away?

Rhino89523 · Post by **Rhino89523** » October 28th, 2011, 2:28 pm

I have a couple old frames I was going to scrap, you can have a head tube, may even have a pink to go with it but no gurantees on that as we don't have to register dirtbikes in Nevada. Nothing is hot so I could sign anything you need signed. Let me know and I will saw it off this weekend.

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » October 28th, 2011, 3:03 pm

didnt someone post that there was exactly this piece on ebay because the seller said the international seller backed out of the deal

louis mielke · Post by **louis mielke** » October 28th, 2011, 5:51 pm

Rhino89523 wrote:I have a couple old frames I was going to scrap, you can have a head tube, may even have a pink to go with it but no gurantees on that as we don't have to register dirtbikes in Nevada. Nothing is hot so I could sign anything you need signed. Let me know and I will saw it off this weekend.

Much appreciated! Honestly I don't need the vin but then again if you have a pink for one I might go ahead and not weld through the numbers!

I'll pm you my details. Thanks again!

louis mielke · Post by **louis mielke** » October 28th, 2011, 5:52 pm

Roostius_Maximus wrote:didnt someone post that there was exactly this piece on ebay because the seller said the international seller backed out of the deal

I'm afraid I'm a little lost on what your saying. I guess I'm slow. Sorry. haha.

Gmbond · Post by **Gmbond** » October 28th, 2011, 6:24 pm

The ice race guys I used to hang out with would weld a "second" steerin head in front of the original one and swap the triple clamps over to lengthen the bike and at the same they would pull the front forks at a steeper angle for different turning.

It gave them a choice of a swap around to almost effectively have two different geometrys to be able to choose.

Looked wierd but seemed to work for them.

blownbillybob · Post by **blownbillybob** » October 31st, 2011, 2:22 pm

EH!!!! Rhino I'd be interested in the lower engine frame rails if you end up cutting that frame up !!!!

Let me know thanks. Bill

Rhino89523 · Post by **Rhino89523** » November 1st, 2011, 9:38 am

I'm hacking it up today, your welcome to the rails but this was one of my bike frames I rode so it looks like all the bikes I ride and the tubes are womped out and flattened from bashing rocks. I am going down to visit my parents Next weekend (the 11th) I could bring it. Your in the Bay Area right?

Post by **MojoScojo** » November 1st, 2011, 10:15 am

Rhino89523 wrote:I'm hacking it up today, your welcome to the rails but this was one of my bike frames I rode so it looks like all the bikes I ride and the tubes are womped out and flattened from bashing rocks.

No skidplates for you either eh? All they ever seemed to do for me is get in the fricken way.

Rhino89523 · Post by **Rhino89523** » November 1st, 2011, 10:49 am

No I actually run a skid plate, I am just such a fat ass and have so little control of my bike that I smear it all over rocks like cream cheese on my bagel this morning.

blownbillybob · Post by **blownbillybob** » November 7th, 2011, 11:50 am

Yep!! SF It don't matter what the rails look like????

What town you headed to, and you down for the day or weekend

Thanks. Bill

Rhino89523 · Post by **Rhino89523** » November 7th, 2011, 12:58 pm

I'm down for the weekend, leaving Thursday night be in late. My parents live in Monte Sereno which is right between Los Gatos and Saratoga. I'll PM you my number and we can meet up.

BannedCR500Riders.com

Wanted: 90-01 frame head tube

Wanted: 90-01 frame head tube

Neck

Frame rails