Anybody tried a Vapor Blaster?

Good Purchase? Paper Weight? Speak Up!!!
Post Reply
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Anybody tried a Vapor Blaster?

Post by motardcr500 »

Anybody tried a Vapor Blaster?
I didn't get it rinsed real well but it sure does a good job.

http://www.oem-cycle.com/forum/download ... hp?id=2648
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Dirty

Image[/img]
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Clean

Image
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

I've been using soda and was about to order a cabinet soda blaster from ABS, but you've got me reconsidering that.
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

I'm actually dead set on a dry ice blaster too, I'd like one in a dedicated trailer so I could do contract work too.
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

I've never tried the dry ice blaster but I can say that after using my Vapor Blaster for a few days I'm selling my soda blaster..... Cheap!
The one thing you have to watch is that it is imperative to fully rinse your part when done....
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

A customer claims to have a line on a bunch of sonic cleaners from the local university, could be the ticket.
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Another salvage yard in town has a big Sonic cleaner.
He is coming over tomorrow or Friday to compare results.. I'll keep you posted.
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

I was thinking sonic after the vapor just to get that media out of threads etc
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Might work really nice.
I have a huge hot water parts washer sitting doing nothing so I'm gonna try it to see how it does,
Check out this pic... Notice the white powdery looking stuff?
That is blast media..

Image
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

More stuff

Image
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Image
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Image
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Image
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

These parts were done as experiments and not all are perfect but you can see the potential...
The big thing is the time... A brake caliper takes about 4-5 minutes to do if it's really nasty..
User avatar
Kuma
Posts: 854
Joined: February 7th, 2010, 8:26 pm
Location: Norco, Cali

Post by Kuma »

can you post a link to the blaster you are using?
Gen 2 AF, yes it's a SH, so I can call it an AF Damm it!
jr475
Posts: 37
Joined: April 11th, 2012, 8:50 pm

Post by jr475 »

What is the price ranges on these machines. I know if I have to ask I cant afford it. They just look expensive for the amount of use I would get out of it.
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

WELL.... I bought a used one....
It was completely rebuilt by the company I bought it from.
I'll get a link to the company later.
In the mean time here is a link to my sad story...

http://www.oem-cycle.com/forum/viewtopic.php?f=3&t=815

So to answer your question, I paid 4900.00 for a used one and a additional 1600 for a two month old 3000 dollar compressor.
DO NOT skimp on your compressor.
If at some point I decide to get a bigger machine I will have to go bigger on my compressor or do a two compressor set up.
I would have bought a bigger compressor but I'm limited to 220 single phase.

I had a buddy bring over a rifle barrel today that had been in a house fire... Whoa...it cleaned up nice... hope it don't rust...

Another buddy that has a salvage company brought over a head and cylinder for his 1000 air cooled monstrosity... I'll be getting pics of what we did ay some point. SWEET! comes to mind when I think about it...

So it's not cheap but a new one is over 10k and you still have to get a decent compressor..
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

Here is a link to how the process works.
http://www.vaporblastingequipment.com/w ... ng-process

You can get a starter machine for about 2k
http://www.wetblasting.com/Products/362 ... st-Machine

This is where I bought mine
http://www.wetblasting.com/
User avatar
motardcr500
Posts: 41
Joined: January 21st, 2012, 10:33 pm

Post by motardcr500 »

I have a proposal for any member...
Take a look at this head

Image

I want to experiment with a protective chemical called Sharkhide.
You can read more about it here:
http://www.oem-cycle.com/forum/viewtopic.php?f=39&t=249

Faq's from the manufacture is here:
http://www.sharkhide.com/mpfaq.html

I want to vapor blast a head then coat it with Sharkhide and see how well it holds up on a bike with high heat.
If it does as I suspect, it should help maintain that bright finish for at least a few years.
Sharkhide is easily removed so that is not a problem.
If the coating does not hold up very well, we can remove the coating and vapor blast the head again.

So, if anyone is getting ready to build their engine, send me your head and I will do the work and send it back at my expense.
It will take a few days to get it done as I want to be sure the tank is clean before I start and I want drying time for the Sharkhide.

I can tell you that if you get gas or any petroleum product on a Sharkhide finished part, the sharkhide will come off.

So, lets go...
Post Reply