Couple of CR500 Kart builds.. JT Engine Works & OEM-CYCL

Recount your rebuilds here!
Post Reply
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Couple of CR500 Kart builds.. JT Engine Works & OEM-CYCL

Post by Sandblaster »

Before I get started I want to thank Adam for this site as well as all his tech info he has helped us with..

Ok, so Jason from JT Engine works and I are building a couple of Kart engines. One has a very short build time so we are doing what we can but we really don't have the time to do what we really want to use.
Plus the customer already bought some Hot Rods kits for the rebuilds. Definitely not my first choice but we will use what we have.

Here is what we are starting with.

Image

Image

I know that some guys don't care if their engine is clean or not but we will steam clean this before we ever crack open the cases :shock:
Last edited by Sandblaster on May 2nd, 2016, 7:15 pm, edited 1 time in total.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

PVL ignition system. I know these aren't the best but we have what we have to use..

Image

QRC head

Image

Yeah... looks bad :cry:
Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Nice port job.... NOT!!!!

Image

Busted bolt tower

Image

CRACK!!!

Image

MORE CRACKS!!!

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Cleaned up the cases and stripped them so I can see what needs to be done and prepped for weld..

Image

More prep

Image

Prepped and ready to lap with some Timesaver.. Love this stuff..

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Started lapping. You can see where the dark area's are on the mating surface.. And you can see the light spots... Dark is making contact, the light isn't doing anything... Yet...

Image

Now look... The mating surface is all dark... Nice :cool:

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Ok, welded up, and cleaned up... ready for assembly..

Image

Polished the ID of the Exhaust flange

Image

Clutch basket is junk... But it's all we have..

Image

It's a little better now.. File, file, file...

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

I hate these gaskets... Where's the Cometic!!!

Image

Oh yeah... It's ready..

Image

The Clutch hub was pretty bad but we have salvaged it at least temporarily

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

I can't get a replacement head in time so here ya go..

Image

Jason is a porting machine.... Now, if he makes it faster that will be a bonus..

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

More progress was made today

Image

Image

Oh yeah... it will look sweet...

Image
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

The customer picked up the engine tonight and races tomorrow.
Jason and I will be there to watch the carnage :-)
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

The question we want to know is will it go or will it blow :shock:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Well... The top end is torched... Disassembled and found a plugged pilot jet :x

I know I know, that's racing... But I don't have to like it.
So, rebuilding the top end. The next race is in two weeks...
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Yesterday we received a 91mm CR500 Wiseco piston.
I took the cylinder and piston to the machinist and told him the specs I wanted it bored to. I should have it early next week.
We will be getting the Kart this time so we can tune it and break it in over a few days.
I can't wait....
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

Race results.
1st heat placed 1st.
Second heat placed 4th.
Main was in second but spun out. Had to start over from the rear of the pack, ended up placing 3rd but was DQ'd due to a early restart that everyone says was bunk.
Oh well, that's racing.
Overall I'm not dissatisfied with the results especially considering that we have a lingering lean issue.
We think we know the cause but will get it resolved next week.
We do have two weeks before the next race so I'm certain we can get this figured out.

Special thanks goes to Adam Millar for his technical support.
Without Adam's help I'm sure we would have finished at the back of the pack....
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

We were really excited for Friday night.
Jason and I spent a full day tuning...
It is running awesome.
So Casey (The driver) goes out and takes his practice laps.
He is all over the place and goes off the track twice.
The last time he went off the track he caught some air.
When he came into the pits he was really excited.
He raved about the engine and how good it ran.
So, the owner (Chris) was changing the chassis around to dial it in for the track conditions and discovered a big crack in the frame right under the drivers seat.
Done for the night...
That's racing... :evil:
But, there is another race next Friday :cool:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
User avatar
Kuma
Posts: 854
Joined: February 7th, 2010, 8:26 pm
Location: Norco, Cali

Post by Kuma »

where are the races held?
Gen 2 AF, yes it's a SH, so I can call it an AF Damm it!
User avatar
Sandblaster
Posts: 84
Joined: January 29th, 2015, 10:24 pm

Post by Sandblaster »

We have been running at Cottage Grove Oregon.
But I believe the next race is in Lebanon Oregon in about 3 weeks.

Results last night...
1st heat placed 2nd
Finished 5th in the second heat and discovered a bad fuel leak.. No smoking please.
In the mains, started 8th... ran up to 5th and the pipe snapped in half. We knew the pipe was running on borrowed time... It just stinks that we couldn't finish the race.
The Kart is running good.
We seemed to be on par power wise with all the leaders.

I can't wait to see how our new build does considering that Adam is whittling us up a new head :cool:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
Post Reply